Front Drilled Heart Pendant Tutorial.

Hello and welcome to my latest wire wrap tutorial.

To make this pendant you will need -
• 0.8mm wire (20g), 1 x 12" (31cm)
• 0.315mm weaving wire (28g) 100cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer)
• cabochon, front drilled heart shape, can be any shape and size, mine is 30mm by 25mm (you can use a different size, just remember to adjust wire length and weave repeats accordingly)
• beads, mine are 2mm and 3mm, again you can use any size you like, smaller the better

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

Facebook - https://www.facebook.com/kellyjjewellery
IG - kellyjjewellery
My Etsy store - (where you can see my tutorials and jewellery for sale)
https://www.kellyjonesjewellery.etsy.com

Thanks for watching x

Music credits
Music: Views
Musician: @iksonmusic

Видео Front Drilled Heart Pendant Tutorial. канала Kelly Jones Jewellery