How I Connect Bluetooth MIDI Controllers to SEQTRAK wirelessly (via Midiflow & iPad)

[THE RED PILL: READ BEFORE PROCEEDING]
"This is your last chance. After this, there is no turning back."

Choosing to follow this experimental setup is like taking the Red Pill. It works perfectly in my construct, but I cannot guarantee it will work in yours.

If you proceed, you do so AT YOUR OWN RISK. I am not responsible for any glitches in your matrix, hardware malfunctions, or financial losses (app purchases).
[About this video]
In this video, I’ll show you how I wirelessly connect the SMC-PAD Pocket to the Yamaha SEQTRAK. Since SEQTRAK does not natively support direct connection with certain Bluetooth MIDI controllers, I use an iPad and the Midiflow app as a "Wireless MIDI Hub."
[Chapters]
0:00 Intro & Performance Demo
0:20 The Red Pill (Disclaimer)
0:30 The Concept (Connection Diagram)
0:55 Setting up Midiflow on iPad
2:16 Checking MIDI data routing
2:47 Outro
[Equipment & Apps]
Controller: M-VAVE SMC-PAD Pocket
Groovebox: Yamaha SEQTRAK (OS v2.00)
Bridge: iPad Air (M2) (iPadOS v18.5)
Midiflow App: https://www.midiflow.com/documentation/
[Additional Notes]
MIDI Configuration:
I pre-configured the SMC-PAD Pocket using MidiSuite (PC/Mac) before connecting. Ensure your controller's MIDI channel matches your SEQTRAK's track settings.
Download MidiSuite here: https://www.m-vave.com/appdownload

Midiflow Settings:
By default, Midiflow runs in the background for 30 minutes. You can adjust this limit in the CONFIG menu to ensure uninterrupted sessions.

Device Compatibility:
While I used an iPad for this routing, the same setup works on an iPhone.

#seqtrak #mvave #midiflow

Видео How I Connect Bluetooth MIDI Controllers to SEQTRAK wirelessly (via Midiflow & iPad) канала algaebeats