Acura TL 3.2 TypeS resetting airbag SRS light Part1

Something is malfunctioning in the SRS Airbag System on this vehicle that's why SRS light don't blink twice.. (step 8) SRS unit need to be replaced.....

To reset the light follow this steps:

1) Find MES connector under the dashboard.
2) Jam it with paper Clip.
4) Connector is jammed with paper clip , turn the ignition on (Do NOT start your car).
5) The SRS light comes on for about 6 seconds and then goes off. Quickly remove paper clip
6) The SRS light will come on again. Quickly insert paper clip.
7) The SRS light goes off. Remove paper clip
8) If you did this correctly, the SRS will blink twice.
9) Turn the ignition off and wait 10 seconds.
10) Turn the ignition on, thus starting your car, and hopefully the SRS light will now be off.
11) Turn your car off, assuming the above instructions worked and your SRS light is now off. If not, either retry the instructions and/or verify that nothing else is wrong.
11) Remove paper clip. Re plug the yellow/green connector back into the "dummy harness".
12) If the SRS light comes back on (assuming you reset the SRS correctly and the light was off), then something is malfunctioning in the SRS Airbag System and you'll have to see a dealership or repair shop.

Видео Acura TL 3.2 TypeS resetting airbag SRS light Part1 канала Alexey Gavrilov