How To Make A Shop Cabinet
I recently bought a CNC machine and needed a place to store it. I threw together a cabinet large enough to not only house the machine, but it includes plenty of storage underneath. It has 4 huge drawers and 1 compartment that has room for an adjustable shelf. The cabinet was built using three 3/4" sheets of maple plywood, one 1/2" sheet of whatever cheap plywood for the back and one sheet of 1/4" plywood for the drawer bottoms.
Download the plans here: https://www.simplecove.com/1065/cnc-cabinet/
Tools used: (affiliate links below help support what I do)
Makita track saw: https://amzn.to/2FgArak
Shopvac: https://amzn.to/2VzEm7W
Dado stack: https://amzn.to/2LTJM98
Crosscut sled: https://amzn.to/2SHeN2C
Push block for table saw: https://amzn.to/2CVlLvA
Quick Clamps: https://amzn.to/2VAcWyH
Bessey 50" clamps: https://amzn.to/2VBKe07
Kreg Pockethole jig: https://amzn.to/2Ca822f
Pockethole screws: https://amzn.to/2SI8An6
Kreg Shelfpin Jig: https://amzn.to/2RBpmHp
Kreg Hardware Mounting Jig: https://amzn.to/2VzxLdv
Kreg Clamp: https://amzn.to/2C4lMLZ
24" Drawer slides: https://amzn.to/2SHf4Tc
Hinges: https://amzn.to/2RfYtJw
35mm bit: https://amzn.to/2LXHJRm
--------------------------------
Help support what I do by buying a SimpleCove t-shirt! http://bit.ly/SCWoodworkingShirt
--------------------------------
Tools I Use (affiliate):
https://www.amazon.com/shop/simplecove
--------------------------------
See more projects like this on my website: http://www.simplecove.com
--------------------------------
Subscribe to my channel: https://www.youtube.com/channel/UCmlRWK6jRFi2No_gDBDjwow?sub_confirmation=1
--------------------------------
Follow me on Social Media:
Instagram: http://www.instagram.com/simplecove
Twitter: http://twitter.com/simplecove
Facebook: http://facebook.com/simplecove
Pinterest: http://www.pinterest.com/simplecove/
--------------------------------
Sean Walker
PO Box 1502
Versailles, KY 40383
Видео How To Make A Shop Cabinet канала SimpleCove
Download the plans here: https://www.simplecove.com/1065/cnc-cabinet/
Tools used: (affiliate links below help support what I do)
Makita track saw: https://amzn.to/2FgArak
Shopvac: https://amzn.to/2VzEm7W
Dado stack: https://amzn.to/2LTJM98
Crosscut sled: https://amzn.to/2SHeN2C
Push block for table saw: https://amzn.to/2CVlLvA
Quick Clamps: https://amzn.to/2VAcWyH
Bessey 50" clamps: https://amzn.to/2VBKe07
Kreg Pockethole jig: https://amzn.to/2Ca822f
Pockethole screws: https://amzn.to/2SI8An6
Kreg Shelfpin Jig: https://amzn.to/2RBpmHp
Kreg Hardware Mounting Jig: https://amzn.to/2VzxLdv
Kreg Clamp: https://amzn.to/2C4lMLZ
24" Drawer slides: https://amzn.to/2SHf4Tc
Hinges: https://amzn.to/2RfYtJw
35mm bit: https://amzn.to/2LXHJRm
--------------------------------
Help support what I do by buying a SimpleCove t-shirt! http://bit.ly/SCWoodworkingShirt
--------------------------------
Tools I Use (affiliate):
https://www.amazon.com/shop/simplecove
--------------------------------
See more projects like this on my website: http://www.simplecove.com
--------------------------------
Subscribe to my channel: https://www.youtube.com/channel/UCmlRWK6jRFi2No_gDBDjwow?sub_confirmation=1
--------------------------------
Follow me on Social Media:
Instagram: http://www.instagram.com/simplecove
Twitter: http://twitter.com/simplecove
Facebook: http://facebook.com/simplecove
Pinterest: http://www.pinterest.com/simplecove/
--------------------------------
Sean Walker
PO Box 1502
Versailles, KY 40383
Видео How To Make A Shop Cabinet канала SimpleCove
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Modern Table | How-To Series | DIY WoodworkingWall Hanging Cabinet Follow-up: Hardware Installation2015 Shop TourCherry Wall Cabinet Guild Build Part 3 - Case glue up, back rabbet and hinge installation!Embedding and Inserting Videos on a SimpleCove Post.How I Made A Wooden Stake & Leather SheathZero Clearance Dado Jig | Woodworking Jig Must HaveHow To Make Base Cabinets For Miter Saw StationNakashima Inspired TableBeautiful Cherry TableMedia Cabinet Build - Part 2How To Cut Perfect Miters For Picture Frames And BoxesDIY Bookcase Project | Woodworking ProjectModern Walnut Coffee TableMedia Cabinet Build - Part 1How To Make A Raised Panel BoxHow To Make A Spline JigHow To Make A Leather Pen CaseCherry Wall Cabinet Guild Build Finale - Applying Shellac/Varnish & Hanging The CabinetEbonizing Wood With India Ink - Finishing 101 SeriesModern Bubinga Cabinet With Plenty Of Storage