Easy Stuart S50 steam engine build from castings, Part 1
In this series I try and show you with a bit of thought easy ways to build this little engine.
This is the first of a series of videos showing the building of a Stuart S50 mill engine model, the full size versions were widely used in the mills in the North of England. The kit was a Birthday gift from my Dad a few years ago and has been sat on a shelf since. I was looking for a chill out project, one to help me shut off for a few hours of an evening, so what better? I have not built a S50 before so if you have any tips or advice please let me know to help others not to fall into any traps. I'm hoping to build this using the parts from the kit (except the odd brass bush) not replacing everything as I go, also I'm filming this hoping that you have some basic knowledge and skill, it would make a long video to film every detail but don't worry if you don't understand anything please just ask. Thanks for watching and I hope this series helps you to build a beautiful mill engine.
Видео Easy Stuart S50 steam engine build from castings, Part 1 канала Matts BitsNBobs Workshop
This is the first of a series of videos showing the building of a Stuart S50 mill engine model, the full size versions were widely used in the mills in the North of England. The kit was a Birthday gift from my Dad a few years ago and has been sat on a shelf since. I was looking for a chill out project, one to help me shut off for a few hours of an evening, so what better? I have not built a S50 before so if you have any tips or advice please let me know to help others not to fall into any traps. I'm hoping to build this using the parts from the kit (except the odd brass bush) not replacing everything as I go, also I'm filming this hoping that you have some basic knowledge and skill, it would make a long video to film every detail but don't worry if you don't understand anything please just ask. Thanks for watching and I hope this series helps you to build a beautiful mill engine.
Видео Easy Stuart S50 steam engine build from castings, Part 1 канала Matts BitsNBobs Workshop
Показать
Комментарии отсутствуют
Информация о видео
25 января 2021 г. 16:51:49
00:11:54
Другие видео канала
UTRILLAS arriving at The West Lancs Light RailwayLathe Bed Stop with accessory blocksNew Machine Day (almost) Shaping Machine, New England ShaperLeyland Model Engineers, Worden Park Short Track June 2018Leyland Model Engineers, Worden Park Long TrackHoley Tandem Frame Batman! How to Repair this Frame?Easy Stuart S50 Build Part 2(a) The SoleplateDoncaster Model Engineering Show 2018How to attach lathe chucks and the like to a rotary table.Easy Stuart S50 Build Part 7 The CrankshaftMyford ML7 mk1 Lathe Please help my Mate (for sale)Giant Defy New BitNnBobsEasy Stuart S50 Build Part 4, Cylinder Covers (made simple)Easy Stuart S50 Build Part 6 The Steam ChestEasy Stuart S50 Build Part 9 The Cross Head & Slide BarsVee Blocks and Lathe Chuck Jaws, what's the groove for?How to set up a round bar in a 4jaw Lathe chuckArboga Mill/Drill, Myford Super 7 B, Fobco Drill, these are just a few of my favorite things.Thanks, have a Merry Christmas and a Happy 2024Ducks and Hens = Noisy NeighborsMyford spindle / thread protection (or any lathe)