Making a Guitar Stand

In this video I make a wooden guitar stand with leather padding for my guitars. The stand can accommodate 5 guitars. This is the first project I have filmed in which I have worked with leather.

My Instagram: https://www.instagram.com/wrkshop71/
Materials List
----------------------

Pine pieces:
2 pcs 70mm x 45mm x 770mm (the main uprights)
2 pcs 70mm x 45mm x 340mm (the feet)
1 pce 70mm x 45mm x 600mm (main bridge piece)
2 pcs Pine rails 40mm diameter x 600mm
Plywood pieces:
2 pcs 45mm x 22mm x 318mm (Rail supports)
1 pce 70mm x 15mm x 600mm (Guitar neck holding piece)
1 pce 55mm x 15mm x 600mm
14 pcs 10mm dia. dowels 50mm long.
4 x 45mm screws ( For fixing the rails)
2 pcs Black soft leather 140mm x 600mm
5 pcs Black leather 15mm x 90mm.
Glue used for the wood and leather was waterproof PVA.
44mm diameter hole saw used for cutting the neck rests and rail/dowel rests.
60mm radius on the ends of the uprights and legs/feet.
The neck rests are 100mm between centers and 100mm from the centers to the ends of the piece.
The dowel/rail rests are 200mm between centers.

Видео Making a Guitar Stand канала wrkshop71