How to remove a stuck or broken Rinnai inlet water filter

This can be a very tricky repair or Maintenace if the filter has been in the unit for a few years.
I have been told of people being charged as much a $1,000.00 to replace the inlet water fitting.
With the tool (Thattanklesstool.com) the removal of the filter cap is a breeze.
If you follow my video this job should only take you about 15 to 20 minutes and you don't have to charge the customer and are and a leg.
tools you will need,
www.thattanklesstool.com
5/8' socket or ratcheting box wrench you should have both.
3/8" ratchet and extension
Dremel with 1/2" and 3/4" wire wheel
brushes
punch and pick
needle nose pliers and small pliers.
filter (white)
20-gauge cleaning swab.
high temperature plumbers' grease or faucet grease.
rags and paper towels.
I hope you enjoy this video.
Mike
PLEASE USE A LICENSED PLUMBER TO INSTALL AND REPAIR YOUR TANKLESS HEATER. PLEASE FOLLOW ALL STATE AND NATIONAL PLUMBING AND GAS CODES AND TO FILE A PERMIT AND OBTAIN AN INSPECTION FROM YOUR LOCAL BUILDING DEPARTMENT.

Видео How to remove a stuck or broken Rinnai inlet water filter канала That Tankless Guy