How to fix the clock on your 2003-2008 Toyota Corolla

This video is about How to fix the clock on your 2003-2008 Toyota Corolla. What happens is that the solder goes bad on both sides of all five resistors on clock's computer board.This video describes how to easily take apart different dash panels, open up the clock housing, and reheat and/or resolder the solder points on the resistors to allow to clock to function again.
FYI: If the reheating of the solder joints do not work, you MUST apply new solder to the ends of all 5 resistors as shown in this video.
Please be careful when using a soldering iron to do this fix.

Hope you guys enjoy and let me know in the comments section below if this video helped you out.

Parts Needed:
1. Plastic Pry tool or Flat head screwdriver with taped end
2. Philips head Screwdriver
6. Weller Soldering Iron Model #: SP25NK

Music:
Rocket by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0
http://creativecommons.org/licenses/by/3.0/

Видео How to fix the clock on your 2003-2008 Toyota Corolla канала Juni S.