How to Make American Flag Cornhole Boards

Welcome to the TradesmenGarage!

This is our first video, of many to come, so why not start out with some good ole' fashioned Cornhole Boards!

For daily picture and video uploads:

Find us on Facebook: https://www.facebook.com/TradesmenGarage

Follow us on Instagram: https://www.instagram.com/TradesmenGarage

**** How to Make Cornhole Boards and Scoreboard with Cricut Maker ****
https://youtu.be/XF-ETQwtrng

**Supplies List**

1, 4x4 sheet of 1/2in plywood
4, 2x4x8 pine
3 inch wood screws
1 1/4 inch pocket hole screws
120 and 220 grit sandpaper
Minwax Gel stain (Hickory)
Minwax Pro Series Spar-Urathane
Foam brushes/Rollers
Gloves
Raggs
1.88 inch Frog Tape (Painters Tape)
4, 1/2 inch carriage bolts, 4 inches long
4, nuts
4, washers
U.S.A Flag Union Stencil (Amazon)
....and Coffee!

**Tools Used**
Circular saw
Table Saw
Miter Saw
Random Orbital Sander
Dust collection system (or a shop vac)
Jig saw
Bench sander
Clamps (various sizes)
3/8 inch drill bit
1/8 inch drill bit (for pre-drilling screw holes)
1/8 inch counter-sink bit
Cordless Drill
Vice Grips
9/16 Socket

Hope you all enjoyed the video and found it helpful! Leave some comments below and let me know what you think!

I'm currently redesigning the boards now for weight reduction and storage improvements

So be sure to subscribe to the channel and enable notifications for when that video goes live! You can get all of my daily updates on Facebook and Instagram as listed above!

Now go do it yourself!
***Music Credits***
All of the background music is royalty free and can be found at:
https://www.bensound.com/

Видео How to Make American Flag Cornhole Boards канала TradesmenGarage