Stihl MS500i cylinder on a MS461 with a WISECO CCC RACING PISTON 🤯 Now THIS is a HYBRID 💯
This is part 2 where I port time this badboy and fab up all the odds and ends so I can install it on the 461 to make a 54mm "big bore" with a forged Wiseco 500i piston... I never know how these concept saws will turn out so i do these videos in stages to take everyone along for the ride... in part 3 we will see if it runs like a dream or ends up in steam JCS style 😎
Also big thanks to david with CCC Racing for the pistons... check out https://www.chainsawcc.com for many race saw mods and parts... He has standard bore Wiseco pistons as well as big bore options.
THANKS FOR WATCHING!!!
Видео Stihl MS500i cylinder on a MS461 with a WISECO CCC RACING PISTON 🤯 Now THIS is a HYBRID 💯 канала JOHNS CUSTOM SAWS
Also big thanks to david with CCC Racing for the pistons... check out https://www.chainsawcc.com for many race saw mods and parts... He has standard bore Wiseco pistons as well as big bore options.
THANKS FOR WATCHING!!!
Видео Stihl MS500i cylinder on a MS461 with a WISECO CCC RACING PISTON 🤯 Now THIS is a HYBRID 💯 канала JOHNS CUSTOM SAWS
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Update on the MS460 NOS project...](https://i.ytimg.com/vi/mMuqfhYqfp8/default.jpg)
![Powdercoat setup on a budget... chainsaw felling dogs...](https://i.ytimg.com/vi/uGdflTL1Uew/default.jpg)
![Husqvarna CD2100 race saw teardown and plan of attack](https://i.ytimg.com/vi/-dHbIIkNafg/default.jpg)
![Stihl MS460 twins show up from Triple S Performance Saws... future Nitrous saws... MS461 drama 💥🔥😳😬](https://i.ytimg.com/vi/pbkiInxp_vs/default.jpg)
![The stihl MS250... why I love it and why I am buying one.. The NOSturbocharger is installed 🤘🤘🤘](https://i.ytimg.com/vi/BS_Ij83IWBE/default.jpg)
![Stihl 084 heaven... tearing some new 084s down to see what I got... and some rare OEM gold 💯](https://i.ytimg.com/vi/1k-E9h7tW-I/default.jpg)
![Ported MS461 builds in action](https://i.ytimg.com/vi/eaeFx6-sWIo/default.jpg)
![The most IMPORTANT 2 stroke porting rule I know... and why I STILL HATE aftermarket cylinders...](https://i.ytimg.com/vi/9EUcy3sUhvE/default.jpg)
![Firing up the MS460 NOS saw after the lightweight flywheel and pinned seals... Ready to cut FINALLY](https://i.ytimg.com/vi/aQDKKwBMhi0/default.jpg)
![Johns Custom Saws is on YouTube!!!](https://i.ytimg.com/vi/zK-LuU2zf8A/default.jpg)
![Husqvarna and McColloch at John's Custom Saws?!?!](https://i.ytimg.com/vi/BgoEw2wUgKs/default.jpg)
![Stihl MS661 porting start to finish... Part 1... teardown/degree wheel/mapping..](https://i.ytimg.com/vi/gpnk6nn1noU/default.jpg)
![The 084 cylinder head back from NY... new expansion chamber design RIPS... thanks for the support 💯](https://i.ytimg.com/vi/24sMP17vuRk/default.jpg)
![The MS461 "Blew up" 💣💥😬... early 4th of July fireworks 💯](https://i.ytimg.com/vi/t2nuR7Q3JxQ/default.jpg)
![Progres!!! 084 race saw... NOS wet shot/ 2 piece head/ trenched case/ ported/ pipe... and some news](https://i.ytimg.com/vi/FLrHvM5BP4U/default.jpg)
![MS500i PIPED / V-Stack / ported / machined piston... super practical](https://i.ytimg.com/vi/mWJhJRAah5A/default.jpg)
![Adjusting a carburetor on a stihl MS461 and similar models...](https://i.ytimg.com/vi/VKHN2A340Ik/default.jpg)
![THE hybrid/hybrid Stihl 064/MS661/MS460 56MM Nitrous saw build progress 😳... READ DESCRIPTION...](https://i.ytimg.com/vi/TcPV_kgEI7Y/default.jpg)
![NOS saw demo!!! Stihl MS460 MS461 with nitrous... custom chainsaws!!! JCS](https://i.ytimg.com/vi/5yfZSA3xLYs/default.jpg)
![Ported and machined stihl MS 500i builds... for work... for fun... and for blowing up 💥](https://i.ytimg.com/vi/BRcZkIITaHk/default.jpg)
![Nitrous MS460 Demo and rundown](https://i.ytimg.com/vi/oclAhHQbDUw/default.jpg)