Stepper Motor Driver Control Board 36820 MS
https://www.mpja.com/Multifunctional-Stepper-Motor-Driver-Control-Board/productinfo/36820+MS/
Multifunctional Stepper motor driver & control board for 2-phase 4-wire and 4-phase 5-wire stepper motors.
Reverse Polarity protection, Over Current & Temperature protected.
Input: for Limit switches.
Voltage Range: 5V-12VDC
Rated Current: 800mA
Step Rate: Jumper Select
Low Range: Each step takes 3.125 seconds-the fastest step takes 0.0625 seconds (16 steps/second).
High Range: each step requires 0.0625 seconds (16 steps/second)-the fastest step is 0.00125S (800 steps/second).
4 operational Modes: Jumper Select
Normal 1: Start and Stop button (alternate Action), Forward and Reverse button (Alternate Action), Potentiometer controls speed Normal 2: Forward run button other button Reverse run. Press either button to stop. Potentiometer controls speed.
Jog: Press button to rotate forward, release to stop, Press other Button for reverse, release to stop, Potentiometer controls speed.
Auto: (Back & Forth) One Button Start and Stop, Other button Forward and Reverse, Potentiometer for speed, Second Potentiometer for automatic round-trip steps. After starting, the motor will automatically run back and forth within the steps adjusted by the pot.
Connections: 0.1" Pitch Header Pins.
Видео Stepper Motor Driver Control Board 36820 MS канала mpjaonline
Multifunctional Stepper motor driver & control board for 2-phase 4-wire and 4-phase 5-wire stepper motors.
Reverse Polarity protection, Over Current & Temperature protected.
Input: for Limit switches.
Voltage Range: 5V-12VDC
Rated Current: 800mA
Step Rate: Jumper Select
Low Range: Each step takes 3.125 seconds-the fastest step takes 0.0625 seconds (16 steps/second).
High Range: each step requires 0.0625 seconds (16 steps/second)-the fastest step is 0.00125S (800 steps/second).
4 operational Modes: Jumper Select
Normal 1: Start and Stop button (alternate Action), Forward and Reverse button (Alternate Action), Potentiometer controls speed Normal 2: Forward run button other button Reverse run. Press either button to stop. Potentiometer controls speed.
Jog: Press button to rotate forward, release to stop, Press other Button for reverse, release to stop, Potentiometer controls speed.
Auto: (Back & Forth) One Button Start and Stop, Other button Forward and Reverse, Potentiometer for speed, Second Potentiometer for automatic round-trip steps. After starting, the motor will automatically run back and forth within the steps adjusted by the pot.
Connections: 0.1" Pitch Header Pins.
Видео Stepper Motor Driver Control Board 36820 MS канала mpjaonline
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to run a stepper motor with a driver.WiFi Stepper Motor Controller with Web-based InterfaceIncorrectly Wired Outlet Found In Newly Built HomeL298n Dual H-Bridge Motor Driver : DC Motors : PWM : Stepper Motors : Eye-On-StuffPulse GeneratorStepper Motor Run Without Driver (Et Discover)การประยุกต์ใช้งาน Stepping motor แบบง่ายๆไม่ต้องใช้ plcControl a Stepper Motor with Hall Effect SwitchesTB6600 Stepper Driver - Arduino ControlStepper Motor controller with IR Remote MPJA.com 34116 MSControlling a stepper motor through a signal generatorStepper controller for speed control of any stepper motorElectronic Basics #24: Stepper Motors and how to use themSimple best life hack run a 12v~ stepper motor without a driverHow To Control a Stepper Motor with A4988 Driver and ArduinoHow does a Stepper Motor work ?How to run stepper motor using TB6560 stepper driverHow Stepper Motors Work - Electric motorControl Position and Speed of Stepper motor with L298N module using ArduinoStepper Motor Basics - 6 Wires Unipolar / Bipolar Motor