75 - New 60 gallon Compressor installation for the Woodworking Shop Ingersoll Rand
75 – New 60 Gallon Compressor installation
Our old 60 gallon Husky Compressor finally went out. It was actually because I forgot to check the oil, and it became too low, and seized up the pump. Very sad for sure.
So, on the advice of a friend, and several others in our King’s Fine Woodworking Community Group, I went with an Ingersoll Rand 60 gallon compressor. This video covers how we swapped out the two.
One interesting thing to note. Is that the Ingersoll Rand, I was told by many, is the upper end of compressors, and the Husky is the lower end. Yet the prove between the two, was only about $65.00. Not really a huge difference for something with a much better reputation and warranty.
The compressor was bought entirely by us, with no sponsorship of any kind. I don’t really know how good it is. But, I can use it for 6 months or a year, and then report back on it for those interested.
Tools used to do the install:
Ingersoll Rand 60 Gallon Compressor
Milwaukee Insulated Electrical Screwdrivers
Voltage detector
Wire Strippers
Compressor Hose
Plug for 240 volt cord
Cord for Compressor
Teflon tape
1000 pound rated utility cart
As an Amazon Associate I earn from qualifying purchases.
Link to the KFW Community Woodworking group. Share pictures of your work & get help if needed. Join our Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools: https://www.facebook.com/groups/KingsFineWoodworkingCommunity/
Help support us through Patreon: https://www.patreon.com/KingsFineWoodworking
Purchase plans on our website: https://kingsfinewoodworking.com/collections/project-plans-for-sale
Please like and share our videos. Thank You!
We love teaching the world to do woodworking.
Видео 75 - New 60 gallon Compressor installation for the Woodworking Shop Ingersoll Rand канала Kings Fine Woodworking
Our old 60 gallon Husky Compressor finally went out. It was actually because I forgot to check the oil, and it became too low, and seized up the pump. Very sad for sure.
So, on the advice of a friend, and several others in our King’s Fine Woodworking Community Group, I went with an Ingersoll Rand 60 gallon compressor. This video covers how we swapped out the two.
One interesting thing to note. Is that the Ingersoll Rand, I was told by many, is the upper end of compressors, and the Husky is the lower end. Yet the prove between the two, was only about $65.00. Not really a huge difference for something with a much better reputation and warranty.
The compressor was bought entirely by us, with no sponsorship of any kind. I don’t really know how good it is. But, I can use it for 6 months or a year, and then report back on it for those interested.
Tools used to do the install:
Ingersoll Rand 60 Gallon Compressor
Milwaukee Insulated Electrical Screwdrivers
Voltage detector
Wire Strippers
Compressor Hose
Plug for 240 volt cord
Cord for Compressor
Teflon tape
1000 pound rated utility cart
As an Amazon Associate I earn from qualifying purchases.
Link to the KFW Community Woodworking group. Share pictures of your work & get help if needed. Join our Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools: https://www.facebook.com/groups/KingsFineWoodworkingCommunity/
Help support us through Patreon: https://www.patreon.com/KingsFineWoodworking
Purchase plans on our website: https://kingsfinewoodworking.com/collections/project-plans-for-sale
Please like and share our videos. Thank You!
We love teaching the world to do woodworking.
Видео 75 - New 60 gallon Compressor installation for the Woodworking Shop Ingersoll Rand канала Kings Fine Woodworking
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![](https://i.ytimg.com/vi/gP6TsvKHK8Y/default.jpg)
![Upgrading the Shop With a New 60 Gallon, 5HP Compressor And Anchoring it in Concrete!](https://i.ytimg.com/vi/CTqD9X28mis/default.jpg)
![Plumbing the barn for our new Ingersoll Rand 5HP 60-Gallon Vertical Air Compressor Model# SS5L5](https://i.ytimg.com/vi/2K-HsdtSsrs/default.jpg)
![Compressor Not Turning On Troubleshooting | Ingersoll Rand Reciprocating Air Compressor](https://i.ytimg.com/vi/G-82t_nrWtc/default.jpg)
![The Ultimate Shop Air Compressor Setup! (at least for me....)](https://i.ytimg.com/vi/As5NybJ7O9w/default.jpg)
![Installing a Shop Air System](https://i.ytimg.com/vi/SOUsUOZB7hg/default.jpg)
![DO NOT BUY This Air Compressor Ingersoll Rand 5HP 80 Gal 2 Stage Review](https://i.ytimg.com/vi/bBG6URMlcKE/default.jpg)
![Wide Driveway Gate DIY- Never Sag - Free Plans - 119](https://i.ytimg.com/vi/BTvtrnXbEyI/default.jpg)
![The Difference Between a Single Stage and Two Stage Air Compressor](https://i.ytimg.com/vi/e9nNRf20IE8/default.jpg)
![60-Gallon Air Compressor Setup and Shop Air Installation Industrial Air (Setup Part One)](https://i.ytimg.com/vi/9bs0zjMSUjU/default.jpg)
![INSTALL OF INGERSOLL RAND AIR COMPRESSOR!!! 2of 2](https://i.ytimg.com/vi/uQcVyMNFhjU/default.jpg)
![Ingersoll Rand 80g compressor follow up review](https://i.ytimg.com/vi/rybNst1PJUo/default.jpg)
![AIR COMPRESSOR SETUP FOR AUTO PAINTING](https://i.ytimg.com/vi/wtKY-44KOsY/default.jpg)
![Ingersoll Rand SS4L5 Air Compressor](https://i.ytimg.com/vi/icUDqWqNYIo/default.jpg)
![Ingersoll Rand Compressor purchase. Factory defect? More to come.](https://i.ytimg.com/vi/_TT2epvHBKg/default.jpg)
![Buying & installing Ingersoll Rand 60 gal compressor](https://i.ytimg.com/vi/PeYRm0XA9v0/default.jpg)
![48 - How To Make a Cigar Humidor with Pacific Coast Tiger Maple](https://i.ytimg.com/vi/ej9CY_lKxpo/default.jpg)
![1 Gallon Air Compressor Shoot Out](https://i.ytimg.com/vi/ffAR4vGFdlo/default.jpg)
![Ingersoll Rand Air Compressor UPDATE, UPGRADE & IR RESPONSE](https://i.ytimg.com/vi/QuZiPMSl5U0/default.jpg)
![Porter Cable Air Compressor Cylinder and Piston Rebuild](https://i.ytimg.com/vi/VDRkWIGgh8k/default.jpg)