Best Impact driver bits | Part 1 | Let's find out | Dewalt vs Makita vs Milwaukee | 2019
Watch Part 2: https://youtu.be/DLqbZyP3R0c
I don't know about you, but I use an impact driver when ever possible. So bits are important when it comes to transferring that power into the fastener.
In this video we are testing some of the most used/sold/popular impact driver bits in my area.
Dewalt MaxFit bits
Makita Gold impact bits
Milwaukee Shockwave impact bits (2nd gen)
Get Best deal on makita gold impact bits here ($12.60 shipped): https://amzn.to/2FS5szX
For the test we drove 100 griprite 3 inch PH2 exterior screws into 2x4 and landscape lumber.
For the test we used the Dewalt DCF887 and Milwaukee Fuel 2853 impact drivers.
Each impact driver bit drove 100 screws back to back (no rest in between), alternating impact drivers at 25 screws at a time.
After the test the Dewalt MaxFit and Makita Impact Gold bits had little wear with minimal paint/coating chipping, and looked as if they could keep going for another day. I did have a small problem with the makita, where several times the 1" bit came off the bit holder and was stuck on the screw, where I had to remove the bit and put it back in the bit holder, other than that they Makita and DeWalt bits performed very well, and still had a great fit on the screws after 100 screws. The Milwaukee shockwave bit failed after ~89 screws and could go no longer; failing to complete the challenge. The bit had rounded/broke off and could no longer fit the PH2 screw.
Considering the impact drivers bits are generally about the same price for sets at the hardware store we are not reviewing cost per bit/fastener.
All the screws and bits used in the test were brand new, and purchased with my own funds at my local hardware store. This video was not sponsored and I am not affiliated with any of these companies. I hope this video was helpful, and we'll see you guys.... NEXT TIME!!!
Instagram: https://www.instagram.com/ak4thewin
Twitter: https://twitter.com/4thewin8 | 4thewin8
Site: https://www.vlog.4thewin.net/
Видео Best Impact driver bits | Part 1 | Let's find out | Dewalt vs Makita vs Milwaukee | 2019 канала 4thewin
I don't know about you, but I use an impact driver when ever possible. So bits are important when it comes to transferring that power into the fastener.
In this video we are testing some of the most used/sold/popular impact driver bits in my area.
Dewalt MaxFit bits
Makita Gold impact bits
Milwaukee Shockwave impact bits (2nd gen)
Get Best deal on makita gold impact bits here ($12.60 shipped): https://amzn.to/2FS5szX
For the test we drove 100 griprite 3 inch PH2 exterior screws into 2x4 and landscape lumber.
For the test we used the Dewalt DCF887 and Milwaukee Fuel 2853 impact drivers.
Each impact driver bit drove 100 screws back to back (no rest in between), alternating impact drivers at 25 screws at a time.
After the test the Dewalt MaxFit and Makita Impact Gold bits had little wear with minimal paint/coating chipping, and looked as if they could keep going for another day. I did have a small problem with the makita, where several times the 1" bit came off the bit holder and was stuck on the screw, where I had to remove the bit and put it back in the bit holder, other than that they Makita and DeWalt bits performed very well, and still had a great fit on the screws after 100 screws. The Milwaukee shockwave bit failed after ~89 screws and could go no longer; failing to complete the challenge. The bit had rounded/broke off and could no longer fit the PH2 screw.
Considering the impact drivers bits are generally about the same price for sets at the hardware store we are not reviewing cost per bit/fastener.
All the screws and bits used in the test were brand new, and purchased with my own funds at my local hardware store. This video was not sponsored and I am not affiliated with any of these companies. I hope this video was helpful, and we'll see you guys.... NEXT TIME!!!
Instagram: https://www.instagram.com/ak4thewin
Twitter: https://twitter.com/4thewin8 | 4thewin8
Site: https://www.vlog.4thewin.net/
Видео Best Impact driver bits | Part 1 | Let's find out | Dewalt vs Makita vs Milwaukee | 2019 канала 4thewin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Best Impact driver bits | Part 2 | Milwaukee vs Wiha vs Wera vs Bosch | Matrix CarbideBest Impact driver bits | Part 3 | Milwaukee vs Wiha vs Wera vs Bosch vs Dewalt vs MakitaWhich Impact Driver Bit is Best? Let's find out! Phillips #2 ShowdownWhich Impact Socket Adaptor is the Best? Who has the Strongest one?Basics of Drill Selection - Haas UniversityDEWALT vs MAKITA Magnetic Screw Lock holder: Which is the best?DeWalt/Titan/Irwin 1/4" Hex Extension Review & ComparisonBest Step Drill Bit? Let's find out! DeWalt, Milwaukee, Bosch, Irwin, Diablo, Makita, Bauer, TEMOIf you use an impact driver, you ABSOLUTELY NEED TO SEE THIS TOOL!
#impactdriver #powertoolsI CAN'T BELIEVE HART TOOLS IS Selling These Driver Bits SetsDIFFERENCE BETWEEN HAMMER DRILL DRIVERS & IMPACT DRIVERS (Ultimate Guide Tips and Tricks)If you use and Impact Driver, you simply NEED TO SEE THIS TOOL!Milwaukee vs Dewalt (Impact Drivers)Which Drill Bit Brand is Best? Let's find out!Dewalt vs Milwaukee Right Angle Drill AdapterDriver bit comparison and review: is high-end worth it?Impact Driver Showdown! Review of 8 Best DriversMilwaukee Tools MATRIX CARBIDE And SHOCKWAVE Bits - Watch Before You Buy!DeWALT Tools Flex Torq Bit Set - WATCH BEFORE YOU BUY!!Essential Must have Driver Bits / Tips for your Impact Drivers