Загрузка страницы

How to replace ball joints on a GM Car and many trucks

Removing the Upper Control arm ball joints from my 1973 chevelle, the kind that are rivoted in. This means they are the original ball joints! Basically this job goes quick and easy, just try not to accidentally grind into the control arm with the grinder.
The new ball joints just bolt in, so I didn't show that part. I would suggest painting your control arm before installing the new parts, unlike I did.

Видео How to replace ball joints on a GM Car and many trucks канала TheGaragemahal
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
5 мая 2013 г. 9:46:29
00:02:55
Другие видео канала
door part 6  1973 chevelle After laying down that thick paint from part 5door part 6 1973 chevelle After laying down that thick paint from part 5EASY Multimeter Basics! Part 3 The Basics of How to Use A Multi-meter VOM Volt Ohm Meter- CONTINUITYEASY Multimeter Basics! Part 3 The Basics of How to Use A Multi-meter VOM Volt Ohm Meter- CONTINUITYdoor part 4 spray painted door.  1973 chevelle cheap paint job projectdoor part 4 spray painted door. 1973 chevelle cheap paint job projectEASY Multimeter Basics! Part 2 The Basics of How to Use A Multi-meter VOM Volt Ohm Meter- CONTINUITYEASY Multimeter Basics! Part 2 The Basics of How to Use A Multi-meter VOM Volt Ohm Meter- CONTINUITYDoor part 3.5  1973 chevelle door body work for rustoleum roller paint jobDoor part 3.5 1973 chevelle door body work for rustoleum roller paint jobDoor part 3.  Wet sanding the primer and guide coat on 1973 chevelle rustoleum paint jobDoor part 3. Wet sanding the primer and guide coat on 1973 chevelle rustoleum paint jobDoor part 2  Inspecting the primer surfacer and what it was able to fill in.  1973 chevelleDoor part 2 Inspecting the primer surfacer and what it was able to fill in. 1973 chevelleDoor part 8 1973 Chevelle Getting There !  Not wet sanded, not buffed.  Rustoleum paint jobDoor part 8 1973 Chevelle Getting There ! Not wet sanded, not buffed. Rustoleum paint jobDoor part 7 1973 Chevelle After wetsanding with 1000 grit. Rustoleum Roll on paint jobDoor part 7 1973 Chevelle After wetsanding with 1000 grit. Rustoleum Roll on paint jobWalk around, tons of work left to do on my 1973 chevelleWalk around, tons of work left to do on my 1973 chevelleHow to make a Miter Saw Stop Block -Cheap Easy System from Scrap WoodHow to make a Miter Saw Stop Block -Cheap Easy System from Scrap Wood1973 Chevelle painting with Rustoleum (rolling)1973 Chevelle painting with Rustoleum (rolling)Door part 5.  1973 chevelle Rolling on the paint finally!Door part 5. 1973 chevelle Rolling on the paint finally!how to replace chevelle control arm bushings nova camaro monte carlo el camino impala c10how to replace chevelle control arm bushings nova camaro monte carlo el camino impala c10How to Replace 1988-2000 Chevy trucks and Suburbans Blower Fan Motor And  Blower Resister!How to Replace 1988-2000 Chevy trucks and Suburbans Blower Fan Motor And Blower Resister!how to install vinyl tile on cement floor my experience part 2how to install vinyl tile on cement floor my experience part 2How to replace bmw E46 3 Series Front Control Arm Bushings : Removal & Installation on a liftHow to replace bmw E46 3 Series Front Control Arm Bushings : Removal & Installation on a liftBody work on 1973 chevelle, removed right door and inspecting filler work  Door part 1Body work on 1973 chevelle, removed right door and inspecting filler work Door part 1Air InlineSander Comparison- Harbor Freight vs. Hutchins HustlerAir InlineSander Comparison- Harbor Freight vs. Hutchins HustlerHow Automotive Relays work, understanding relaysHow Automotive Relays work, understanding relayshow to install vinyl tile on cement floor my experience part 4how to install vinyl tile on cement floor my experience part 4
Яндекс.Метрика