Pipe! - The Most Powerful Two Stroke Ever
Getting that pipe ready, not an easy task for someone welding-challenged
T-shirts, hoodies, stickers etc
https://teespring.com/stores/2stroke-stuffing-merch
Support me on Patreon!
https://www.patreon.com/2strokestuffing
Donate to 2STROKE STUFFING
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BMXLUFKASKAJC
or
https://www.paypal.me/2strokestuffing
This is the road to the most powerful two stroke (relative to cc) ever. Aiming for 30+hp from 50cc.
Lofty goal!
Here's a few key points:
- 100% bore width single exhaust port, no bridges, non. This leads to unrivaled blowdown specific time area.
- What should be excellent transfer duct geometry, large radius on inner walls to minimize flow separation, constant side wall angles for control, large duct volume for gentle "delivery"
- Valveless tuned length intake with nitromethanol injection, aimed at the transfer inlets.
- Ridiculous crankcase volume, no piston pumping here, it's all about resonance!
- Tuned pipe, tuned crankcase, tuned intake, tuned everything, resonance!
To be able to run such an monstrosity of an exhaust port without instant catastrophic failure there's a special two-piece piston with a retained piston ring(thanks Mark Atkinson). It has no holes in the skirt either, no short circuiting between the transfers and the exhaust.
I've designed the whole thing from scratch.
3D printed, cast(lost PLA), and "Nikasil" plated the cylinder myself in my garage. Designed the case and pipe for it. I've received lots of help from the community with things I haven't been able to do myself(lack of machinery and/or skill)
Especially machining, until recently I didn't even own a lathe.
Thank you guys, you're the best!
I've designed and built a landspeed bike for the engine, plan is to set a new class record at Bonneville.
Thanks for following the adventure, and fear not, I've already got plans for the next project - Symmetric transfers, four exhaust ports, two rotary valves(but not where you think they'll be), forced induction, no need for expansion chamber(!) ++
Many years of two stroke madness up ahead!
Easy is not worth anything
Instagram
https://www.instagram.com/2strokestuffing
facebook
https://www.facebook.com/2strokestuffing
DIY Arduino dyno shield
ardyno.weebly.com
Twostrokerider
https://www.twostrokerider.se
Twostroke.se
https://www.twostroke.se
Treatland
https://www.treatland.tv
Emot Racing
http://www.emot.nl
Get Simpledyno here:
https://sites.google.com/site/simpledyno/home
Видео Pipe! - The Most Powerful Two Stroke Ever канала 2STROKE STUFFING
T-shirts, hoodies, stickers etc
https://teespring.com/stores/2stroke-stuffing-merch
Support me on Patreon!
https://www.patreon.com/2strokestuffing
Donate to 2STROKE STUFFING
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=BMXLUFKASKAJC
or
https://www.paypal.me/2strokestuffing
This is the road to the most powerful two stroke (relative to cc) ever. Aiming for 30+hp from 50cc.
Lofty goal!
Here's a few key points:
- 100% bore width single exhaust port, no bridges, non. This leads to unrivaled blowdown specific time area.
- What should be excellent transfer duct geometry, large radius on inner walls to minimize flow separation, constant side wall angles for control, large duct volume for gentle "delivery"
- Valveless tuned length intake with nitromethanol injection, aimed at the transfer inlets.
- Ridiculous crankcase volume, no piston pumping here, it's all about resonance!
- Tuned pipe, tuned crankcase, tuned intake, tuned everything, resonance!
To be able to run such an monstrosity of an exhaust port without instant catastrophic failure there's a special two-piece piston with a retained piston ring(thanks Mark Atkinson). It has no holes in the skirt either, no short circuiting between the transfers and the exhaust.
I've designed the whole thing from scratch.
3D printed, cast(lost PLA), and "Nikasil" plated the cylinder myself in my garage. Designed the case and pipe for it. I've received lots of help from the community with things I haven't been able to do myself(lack of machinery and/or skill)
Especially machining, until recently I didn't even own a lathe.
Thank you guys, you're the best!
I've designed and built a landspeed bike for the engine, plan is to set a new class record at Bonneville.
Thanks for following the adventure, and fear not, I've already got plans for the next project - Symmetric transfers, four exhaust ports, two rotary valves(but not where you think they'll be), forced induction, no need for expansion chamber(!) ++
Many years of two stroke madness up ahead!
Easy is not worth anything
https://www.instagram.com/2strokestuffing
https://www.facebook.com/2strokestuffing
DIY Arduino dyno shield
ardyno.weebly.com
Twostrokerider
https://www.twostrokerider.se
Twostroke.se
https://www.twostroke.se
Treatland
https://www.treatland.tv
Emot Racing
http://www.emot.nl
Get Simpledyno here:
https://sites.google.com/site/simpledyno/home
Видео Pipe! - The Most Powerful Two Stroke Ever канала 2STROKE STUFFING
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Worlds Most Powerful Two Stroke Lives Again!Brute Force Nitro Blown 50cc Two Stroke P4 - Carbon fiber nylon parts, head insert ++EXPANSION CHAMBER BUILD PART 1: Design, Math, and MaterialsHow It's Made | Bill's Pipes MX2 Works Pipe | TransWorld MotocrossMaking a Two Stroke Expansion ChamberMoped Dick at Bonneville World Finals 2019 - 50cc Two Stroke Landspeed BikePort Matching, Porting And Trenching Two-Stroke Engine CasesHow 2-stroke exhaust pipes work | Offroad EngineeredUnlocking the secrets of 2 stroke expansion chamber exhausts E1Nikasil Plating Cylinder at Home! - World's Most Powerful Two Stroke EverThe Most Powerful Two Stroke Ever - Stuffing it!Even the Most Powerful Two Stroke has to wait for parts...Two Stroke Pipe Building - Rolling Steel Ep. 2HIGHER EXHAUST PORT, GOOD IDEA? How Exhaust Port Timing Affects Two Stroke Performance.Honing Plates make Difference? Most Powerful Two Stroke Ever.50cc / 20hp! Homemade Rotary Valve Peugeot Spx 2STROKE STUFFING E26Building The Ultimate Two Stroke Engine!You haven't seen a cylinder like this before! Brute Force Blown Nitro 50cc Two Stroke P2The REAL SECRET of the world’s FASTEST TWO STROKE!How to Plot Two Stroke Expansion Chamber Cones on Paper from Software