DEK TCM -2013
Air Delivery System: Re-circulating
Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C
Temperature control: +/- 0.5°C
Cooling Capacity: 2000W
Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C)
Air In Filter: G4 (91% Average Arrestance) EN 779: 2002
Refrigerant Gas: R134a 0.75Kg
Full load current: 12.6A
Start Up Current: 20A
Frequency: 50 / 60Hz
Voltage: 230V +/- 10% (207V – 253V working range) Single Phase
Acoustic Noise: higher than 75dB
Dimensions: 1300mm High (+ beacon), 510mm, 540mm
Condensate: Collected in 5-litre container for disposal or piped to drain
Weight: 100Kg
Documentation not included
the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers.
The operating range of the TCM offers wide control of the process s temperature on either side of the factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient.
Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life.
Due to its optimised design and re-circulating system, the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems.
The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open.
To monitor process temperature the TCM utilises the output from the printer integrated Temperature Sensor located on the print carriage resulting inaccurate feedback and control.
To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates.
The Modules operating status is indicated by the provision of a 'four colour' beacon clearly visible to line operators.
Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate levels and give a warning via the beacon when the container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow.
Видео DEK TCM -2013 канала Machine Saver Romania
Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C
Temperature control: +/- 0.5°C
Cooling Capacity: 2000W
Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C)
Air In Filter: G4 (91% Average Arrestance) EN 779: 2002
Refrigerant Gas: R134a 0.75Kg
Full load current: 12.6A
Start Up Current: 20A
Frequency: 50 / 60Hz
Voltage: 230V +/- 10% (207V – 253V working range) Single Phase
Acoustic Noise: higher than 75dB
Dimensions: 1300mm High (+ beacon), 510mm, 540mm
Condensate: Collected in 5-litre container for disposal or piped to drain
Weight: 100Kg
Documentation not included
the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers.
The operating range of the TCM offers wide control of the process s temperature on either side of the factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient.
Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life.
Due to its optimised design and re-circulating system, the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems.
The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open.
To monitor process temperature the TCM utilises the output from the printer integrated Temperature Sensor located on the print carriage resulting inaccurate feedback and control.
To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates.
The Modules operating status is indicated by the provision of a 'four colour' beacon clearly visible to line operators.
Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate levels and give a warning via the beacon when the container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow.
Видео DEK TCM -2013 канала Machine Saver Romania
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Used T-nut driving machine, STAFAS, model HFM-CFM6, MFG: 2013Scania Beulas touristic busRisco RS 1040 CCompany presentation Machine Saver RomaniaBystronic BTL 2800 laser cutting machinebra cups haeting moulds 2Pietroberto MINI 2, automatic group, used, year of manufacture 2003Pietroberto MINI 2, automatic groupGrain moisture tester | Kett Riceter J301INJECT STAR Pokelinjektor BI 176, 2006RAM Computerized Metering Devices - Tensionatori electronici RAM - Tensionatori Elettronici RAM -1USED HEAT TREATMENT FURNACES CMS ITALIA MODEL DMH 7FORD TRUCKS 8X4 TIPER TRUCK 2021MITUTOYO CRYSTA-Apex EX 9166T coordinate measuring machine, Serial no. 60011258, MFG 2018Used mixer with fixed stainless steel bowl, no nameVolkswagen Crafter 3.5 van, L5H3, year of manufacture 05/2018Laser cutting equipment, brand Gemini CAD Systems - model JG 17080, 2014CNC 4 axes Horizontal Machining Center Haas EC500, 2014Stainless steel conveyor, swan neck with squeegees, walls and hopper, brand CMAPegas Gonda 360x500 GH-LR Gravitational band saw machine