Jimny Manual locking hub conversion

This is only a rough guide. You can do it completely different if you wish.
This works for all sn413 Jimnys with vacuum operated hubs.

This setup is still holding up after numerous glass house mountain trips, cape York and Western Australia tracks. (20,000km)

Parts used are as follows:
-2x 26 spline manual hubs from a Sierra
-2x spacer rings. (These can be sourced easily online)
-4 paper gaskets for the mating surfaces
-12x longer bolts because you’re adding a plate in between. The original bolts won’t be long enough. You can measure this all up yourself.

-*Optional but recommended* gasket maker

Видео Jimny Manual locking hub conversion канала JimnyThings