Small RYOBI w/ Diablo blade to cut & cape steel pipe @BrooklynLicensedPlumber Tricks of The Trade

How To cut and keep steel nipple from pipe. Cut old defective pipe leaving approximately a quarter of an inch too A half inch piece of meat. Start by cutting sideways at an angle in order to start making a groove. Then straighten out the cut but make sure not to cut too deep and damage the threads. Cut approximately A 16th of an inch and Look closely to see if you cut enough of the pipe this may take some skill but when you’re satisfied that you cut enough without damaging the threads of the fitting you can start hammering in. And start removing the threads with a tool called a caping Chisel 

Видео Small RYOBI w/ Diablo blade to cut & cape steel pipe @BrooklynLicensedPlumber Tricks of The Trade канала Brooklyn Plumber