How to Hang a Porch Swing through Vinyl | Ask This Old House
Ask This Old House general contractor Tom Silva adds structure to a porch in order to safely hang a swing
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 3-4 hours
Cost: $200
Skill Level: Moderate
Tools List for Hanging a Porch Swing:
Hammer [https://amzn.to/2JmGkEY]
Prybar [https://amzn.to/2V9dVnU]
Wrench [https://amzn.to/2LvSduP]
Drill [https://amzn.to/302tbH0]
Shopping List:
Porch swing [https://amzn.to/2Yc7LFC]
2x4” boards [https://amzn.to/2WwmWJo]
Lag screws [https://amzn.to/2WvBJE6]
Wood screws [https://amzn.to/2H3m60f]
Thick drill bit [https://amzn.to/2JotRk7]
Thin drill bit [https://amzn.to/2VSntYV]
Steps:
1. Start by removing the vinyl ceiling using a hammer and a prybar up until the furthest point the swing will hang.
2. If the swing cannot be hung on structure, structure will need to be added. Cut the 2x4” to size and then hammer it into position, preferably over the furring strip (if there is one) to accommodate the additional _” depth it creates. Secure the structure with wood screws.
3. Reinstall the vinyl ceiling up until the panels fall just over the added structure.
4. Drill a pilot hole through the vinyl, the furring strip, and the added structure using the drill and a drill bit. To keep the vinyl from cracking, it helps to start with a thicker drill bit just for the vinyl, then switch to the thin drill bit to drill the rest of the hole.
5. Mount the bracket that comes with the swing to the pilot holes. Hand tighten the bracket through the pilot hole using a lag screw and a wrench.
6. Install the vinyl ceiling up until the next location for the other side of the swing and repeat the process.
7. Install the rest of the vinyl ceiling.
8. Hang the swing onto the mounting brackets.
Resources:
Depending on which direction you’d like to hang the porch swing, additional structure may need to be added to ensure the swing is installed safely.
To add structure, Tom took a piece of 2x4” and hammered it into place. He then secured it with wood screws. To secure the brackets from the swing, Tom used lag screws. All of these tools and hardware can be found at home centers.
The swing the homeowners had picked out was the Coral Coast Casco Bay Resin Wicker Porch Swing with Optional Cushion, which comes from Hayneedle (https://amzn.to/2Yc7LFC). The swing comes with the green hanging brackets, but does not come with hardware to attach the brackets to the ceiling.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Hang a Porch Swing through Vinyl | Ask This Old House
https://www.youtube.com/user/thisoldhouse/
Видео How to Hang a Porch Swing through Vinyl | Ask This Old House канала This Old House
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 3-4 hours
Cost: $200
Skill Level: Moderate
Tools List for Hanging a Porch Swing:
Hammer [https://amzn.to/2JmGkEY]
Prybar [https://amzn.to/2V9dVnU]
Wrench [https://amzn.to/2LvSduP]
Drill [https://amzn.to/302tbH0]
Shopping List:
Porch swing [https://amzn.to/2Yc7LFC]
2x4” boards [https://amzn.to/2WwmWJo]
Lag screws [https://amzn.to/2WvBJE6]
Wood screws [https://amzn.to/2H3m60f]
Thick drill bit [https://amzn.to/2JotRk7]
Thin drill bit [https://amzn.to/2VSntYV]
Steps:
1. Start by removing the vinyl ceiling using a hammer and a prybar up until the furthest point the swing will hang.
2. If the swing cannot be hung on structure, structure will need to be added. Cut the 2x4” to size and then hammer it into position, preferably over the furring strip (if there is one) to accommodate the additional _” depth it creates. Secure the structure with wood screws.
3. Reinstall the vinyl ceiling up until the panels fall just over the added structure.
4. Drill a pilot hole through the vinyl, the furring strip, and the added structure using the drill and a drill bit. To keep the vinyl from cracking, it helps to start with a thicker drill bit just for the vinyl, then switch to the thin drill bit to drill the rest of the hole.
5. Mount the bracket that comes with the swing to the pilot holes. Hand tighten the bracket through the pilot hole using a lag screw and a wrench.
6. Install the vinyl ceiling up until the next location for the other side of the swing and repeat the process.
7. Install the rest of the vinyl ceiling.
8. Hang the swing onto the mounting brackets.
Resources:
Depending on which direction you’d like to hang the porch swing, additional structure may need to be added to ensure the swing is installed safely.
To add structure, Tom took a piece of 2x4” and hammered it into place. He then secured it with wood screws. To secure the brackets from the swing, Tom used lag screws. All of these tools and hardware can be found at home centers.
The swing the homeowners had picked out was the Coral Coast Casco Bay Resin Wicker Porch Swing with Optional Cushion, which comes from Hayneedle (https://amzn.to/2Yc7LFC). The swing comes with the green hanging brackets, but does not come with hardware to attach the brackets to the ceiling.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we're ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O'Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Hang a Porch Swing through Vinyl | Ask This Old House
https://www.youtube.com/user/thisoldhouse/
Видео How to Hang a Porch Swing through Vinyl | Ask This Old House канала This Old House
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Porch Swing InstallHow to Update Oak Stair Treads and Risers | Ask This Old HouseHow to Repair a Rotted Porch Post | Ask This Old HouseHow to Hang a Heavy Mirror on Masonry | Ask This Old HouseWILL IT HOLD ALL FOUR OF US?! | INSTALLING A PORCH SWING DAY BED UNDER OUR PERGOLAHow to Build a Swing Set | Ask This Old HouseHow to Build a SIMPLE Porch swing (basic tools!)How to Replace Basement Bulkhead Doors | Ask This Old HouseTying the rope for your porch swing.How to Install a Beadboard Porch Ceiling | This Old HouseHOW TO INSTALL A CHILD PORCH SWING SET | Swing Seat for Front Porch or Back Patio | Installing DemoCertainTeed Soffit and Fascia InstallationHollywoodschaukel selber bauen/Porch Swing DIY/ Hängeschaukel/ Swing Chair/ Bed Swing/Садовые качелиHow to Install a Rain Gutter | Ask This Old HouseDIY $40 Farmhouse Porch SwingHow to Recreate the Look of an Antique Closet Door | Ask This Old HouseSuper Easy Wall Stud & Ceiling Joist Finding TrickHow To Make A Porch Swing Ergonomic, $120 and Comfortable!DIY Porch Bed SwingMAKE A PORCH SWING BED - TWIN MATTRESS EDITION