Build a DIY RC Car with Steering for Under $20

In this video tutorial we build a basic Remote-controlled Car out of PVC on a budget with steering. This DIY RC Car build is technically the heavily-improved version of the first RC Car I made in a popular video from 2019. A handful of you in that video had good suggestions as to what to improve on the car, so I took note and came out with a completely new Radio-controlled car by my design!

The car operates on these $5 40mHz toy-grade radio communication boards giving it an operating range of 10-20m, has 4 channels of control, and uses a 6V battery pack that'll last the car up to 2.5 hours of run time.
The DIY RC Car chassis/frame is fully handmade out of PVC.
The car achieves a speed of up to ~2.5m/s and is belt-driven by a 180 brushed motor with its 3 pulley wheels, implementing one for added torque by my design and also features the motorized Self-centering steering mechanism unit that returns the wheels back to neutral position every time.

➡️ Before MAKING, please WATCH the previous video about its DIY Steering mechanism: https://youtu.be/i6aAgBIqS2c

Previous DIY RC Car (easy) from 2019: https://youtu.be/ZdtPTUsrAA4

----------------------------------------------------------------------
TS80P Smart Soldering Iron by Miniware - https://www.amazon.com/gp/product/B0B9MR5PM4

For more details about the TS80P - https://www.miniware.com.cn/product/ts80p-soldering-iron-main/Visit Miniware's official site to see the full selection of the quality tools they offer - https://www.miniware.com.cn/
----------------------------------------------------------------------
👉 Visit my online Storefront: https://sites.google.com/view/maximagination-workshop/
----------------------------------------------------------------------
☕ Buy me a coffee: https://www.buymeacoffee.com/MaxImagination
----------------------------------------------------------------------
Instagram: @max.imagination - https://www.instagram.com/max.imagination/?hl=en
Instructables page: https://www.instructables.com/member/Max%20Imagination/
----------------------------------------------------------------------
Car's Blueprints - https://drive.google.com/file/d/1-hGo5OucI-pgzPkOzEUP7pPBkNlNVI_k/view?usp=sharing

Circuit diagrams - https://drive.google.com/drive/folders/1RQNa5uaZ6ifPjrveJnyMAQshnMWOBf7N?usp=sharing

Disclaimer: Amazon purchase links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!

Materials and parts needed for this project with links (Cost = $20 USD only including parts used)
RC 40mHz Tx and Rx boards - https://amzn.to/3r8daBv
Drive motor 180-type - https://amzn.to/3JjdJPn
Pulley wheels, Rubber belt/band, and car wheels from Gear Kit - https://amzn.to/3IeMR35
(x3) Dual AA battery holder trays - https://amzn.to/3Uizhhl
(x6) AA Alkaline Batteries - https://amzn.to/3Zqk29t
ON/OFF Rocker switch 3A - https://amzn.to/3iqzJg1
(x4) Momentary pushbutton switches - https://amzn.to/3AVJlpH
Micro slide switch SPDT - https://amzn.to/3Fdfewh
330 Ohm resistor + LED from Kit - https://amzn.to/3XIlOlR
(x2) Perf Prototyping boards + Soldering Lead, pin headers and more in kit - https://amzn.to/3ieX2cI
Bicycle steel spoke - https://amzn.to/3UdEZ40
Lollipop stick tube - https://amzn.to/3EPIuIn
Ballpoint pen tubes (Be careful with ink!) - https://amzn.to/3u9PVVI
M3 Bolts and nuts kit - https://amzn.to/3GZHELS
(x2) Micro screws for drive motor (taken from old laptop)
Car's wheels 2.8" (Slightly bigger) - https://amzn.to/423WkBN
PVC Drain pipe - Hardware Store

🪛🔧🔨 Tools and extra supplies I used:
➡️ Soldering Iron (Kit) - https://amzn.to/3X6L5Wq
➡️ Drill - https://amzn.to/3EDe0u8
➡️ X-Acto Hobby Knife - https://amzn.to/3XbL7ML
➡️ Screwdriver kit - https://amzn.to/3V6vgNX

Music credits:
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/matrika/overdrive
License code: YGND9NZTFI5CILU0
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/pryces/aspire
License code: DE2RRWYHY93V5IDG
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/fugu-vibes/spatial
License code: P4IZLPXSCIV2M1LE
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/mountaineer/monday-morning
License code: FIL9B5VKRUPAUPJ4
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/neozoic/sail-away
License code: 1UFLZTBCXUTIUGPL
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/hartzmann/paradise-island
License code: 7G07DYNOZC9PJKB9
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/ra/let-good-times-roll
License code: I1X0PXFELEJAMBAM
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/hartzmann/bamboo
License code: YQFUFLHDZN5XGVYF
Music from Uppbeat (free for Creators!):
https://uppbeat.io/t/aavirall/gravity
License code: IBRXAPU95FOCIHP4

Other keywords:
make rc car at home, diy rc car parts, diy rc car from scratch, diy rc car frame, diy rc car drivetrain, diy rc car controller.

#diyrccar #maximagination #remotecontrol

Видео Build a DIY RC Car with Steering for Under $20 канала Max Imagination