Antique Bathroom Door Part 2
We are refurbishing a beautiful 100-year-old, six panel, wooden door for our bathroom.
This is the second video in a set of two about this antique door.
We fit new brass hinges to the door, then once we are happy with the fit of the door in the frame, we under coat then paint the door before finally hanging it and fitting the rim latch and door handles.
These types of doors are available at reclamation yards, find out what is involved in refurbishing them, you too can have a really special looking door, all it takes is a little elbow grease.
Видео Antique Bathroom Door Part 2 канала Course You Can
This is the second video in a set of two about this antique door.
We fit new brass hinges to the door, then once we are happy with the fit of the door in the frame, we under coat then paint the door before finally hanging it and fitting the rim latch and door handles.
These types of doors are available at reclamation yards, find out what is involved in refurbishing them, you too can have a really special looking door, all it takes is a little elbow grease.
Видео Antique Bathroom Door Part 2 канала Course You Can
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Design Curved T-Nuts, Make Fixture Plate, Milling Curved T Nuts Part 1](https://i.ytimg.com/vi/KxHYTzD3PpY/default.jpg)
![Hinges, Selection, Fitting: DIY Fitted Wardrobes Part 5.](https://i.ytimg.com/vi/-hNINWamFZU/default.jpg)
![Plunge Milling. How to shape 5mm (1/4") thick steel using just hacksaw & File. Quill Handle Part 6.](https://i.ytimg.com/vi/nPJIHmtjQ-w/default.jpg)
![How to Make a Copper Rose Part 2. Scrap Water Pipe. Copper Artwork.](https://i.ytimg.com/vi/wsnuUxLEmR8/default.jpg)
![Vintage Rim Latch Rebuild Part 1](https://i.ytimg.com/vi/D92G38d-up4/default.jpg)
![Dyson V6 Battery Change](https://i.ytimg.com/vi/pk6lslLokGE/default.jpg)
![How to make a pull-out shelf using drawer runners. My brew cupboard.](https://i.ytimg.com/vi/_a-e4_tzOdA/default.jpg)
![How To File a Curve. Two methods shown in closeup, and slow motion.](https://i.ytimg.com/vi/HloiEqXPaG8/default.jpg)
![Drone detector microphone cover. Sewing fury material. Dome made from foam. Wind Jammer Part 2](https://i.ytimg.com/vi/4UzIjNwPr7I/default.jpg)
![How to make a square broach to cut a square hole. The handle is finished. Quill Handle Part 7.](https://i.ytimg.com/vi/nmHhn3091B0/default.jpg)
![Guitar Shelf Part 1. Safe Guitar Storage. Easy DIY solution.](https://i.ytimg.com/vi/XQ01jHX81kc/default.jpg)
![Making & Fitting Drawer Fronts: DIY Fitted Wardrobes Part 7.](https://i.ytimg.com/vi/UwaVcXAto3k/default.jpg)
![How to Make a Copper Rose Part 1. Scrap Water Pipe. Copper Artwork.](https://i.ytimg.com/vi/nK14rHE-7mg/default.jpg)
![Electric Motor Rewire Stator: Part 2](https://i.ytimg.com/vi/XjwyZ4r7iz4/default.jpg)
![Milling Angled Mounts](https://i.ytimg.com/vi/KEpWc_fpKXU/default.jpg)
![Make a Spring Centre. Turn Stainless Steel, Brass, Silver Steel. Heat Treatment of Silver Steel.](https://i.ytimg.com/vi/6aGPJyJljo8/default.jpg)
![How To Start a Design & Organize Your Ideas. Quill Handle Part 1](https://i.ytimg.com/vi/j6WE6y3kze4/default.jpg)
![Metal work. Marking out. Jig making. Turning on the lathe. Drilling at an angle. Wind Jammer Part 3](https://i.ytimg.com/vi/1cbnq6oO3hI/default.jpg)
![BMW R Series Boxer Petrol Tap Rebuild](https://i.ytimg.com/vi/bita2cuvHSU/default.jpg)
![Milling a Counterbore. Turning an angled Surface. Bore a flat bottomed hole. Quill Handle Part 4.](https://i.ytimg.com/vi/QJJ7fk4SAbU/default.jpg)