A Tiny ESP32 Handheld NES Emulator for the ESP32
A Tiny ESP32 Handheld NES Emulator
Requirements: ESP32 , ST7789 LCD, MICROSD CARD slot, PCM5102 I2S AUDIO MODULE, OTHER PARTS...
if you enjoyed those videos, then please subscribe to my channel which I update every week
👉 Subscribers : https://bit.ly/2EpEwrU
+++++++++++++++
++ FEATURES: +
+++++++++++++++
MicroSD card support
240*240 1.3" LCD ST7789 display
I2S AUDIO support PCM5102 module
huge NES ROMs up to 512kB (read from FLASH)
==========
= Required =
==========
□ ESP32 Development Board
□ Using 7 push Buttons Switches
□ 240*240 1.3" LCD ST7789 display
□ PCM5102 I2S AUDIO MODULE,
□ MICROSD CARD slot,
=========================
= Schematic is pretty simple: =
=========================
AUDIO i2S ======= TO ======== ESP32
I2S_BCK_IO //BCK ---------------------- (GPIO 27)
I2S_WS_IO //LCK ------------------------(GPIO 32)
I2S_DO_IO //DIN ------------------------- (GPIO 25)
Micro SD Card ========= TO ======= ESP32
SD_MOSI_PIN -------------------------------------- (GPIO 17)
SD_MISO_PIN ---------------------------------------(GPIO 16)
SD_SCK_PIN -----------------------------------------(GPIO 21)
SD_CS_PIN -------------------------------------------(GPIO 22)
NES FOLDER ("/NES/") where to place the NES ROMs
Buttons ========== ESP32
ALL Buttons 5V ----- TO ------ ESP32 PINs --TO --10ohm resistor ---- GND
5V ------- Button UP ------------- 39 //SVN ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button DOWN ---------- 35 //IO35 ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button LEFT ------------ 36 //SVP. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button RIGHT ---------- 34 //IO34. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button A ---------------- 2 //IO2. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button B ---------------- 14 //TMS. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button START ---------- 15 //TDO. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button SELECT --------- 13 //TCK ----/|/\1k Ohm /\/\/\------ GND
============
= VIDEO OUT =
============
GPIO26 ------- VIDEO OUT -------- GND
===========================
= The Source-Code here: =
===========================
https://github.com/Djamal-UK/NesCat/archive/main.zip
#esp32_arduino #esp32_nintendo_emulator #esp32_snes_emulator
------------------------------------------------------------------------
About Social Media, Business, and Blogging
------------------------------------------------------------------------
https://www.youtube.com/djamaluk
https://www.facebook.com/Djamal.UK
https://twitter.com/DjamalUK
https://Djamal.UK
Code and Schematic OR Any Questions Please let me know in the comment section below
Thank you everyone for stopping by my youtube channel I would love to hear from you, so leave a comment to let me know you were here!
Видео A Tiny ESP32 Handheld NES Emulator for the ESP32 канала Djamal.Uk
Requirements: ESP32 , ST7789 LCD, MICROSD CARD slot, PCM5102 I2S AUDIO MODULE, OTHER PARTS...
if you enjoyed those videos, then please subscribe to my channel which I update every week
👉 Subscribers : https://bit.ly/2EpEwrU
+++++++++++++++
++ FEATURES: +
+++++++++++++++
MicroSD card support
240*240 1.3" LCD ST7789 display
I2S AUDIO support PCM5102 module
huge NES ROMs up to 512kB (read from FLASH)
==========
= Required =
==========
□ ESP32 Development Board
□ Using 7 push Buttons Switches
□ 240*240 1.3" LCD ST7789 display
□ PCM5102 I2S AUDIO MODULE,
□ MICROSD CARD slot,
=========================
= Schematic is pretty simple: =
=========================
AUDIO i2S ======= TO ======== ESP32
I2S_BCK_IO //BCK ---------------------- (GPIO 27)
I2S_WS_IO //LCK ------------------------(GPIO 32)
I2S_DO_IO //DIN ------------------------- (GPIO 25)
Micro SD Card ========= TO ======= ESP32
SD_MOSI_PIN -------------------------------------- (GPIO 17)
SD_MISO_PIN ---------------------------------------(GPIO 16)
SD_SCK_PIN -----------------------------------------(GPIO 21)
SD_CS_PIN -------------------------------------------(GPIO 22)
NES FOLDER ("/NES/") where to place the NES ROMs
Buttons ========== ESP32
ALL Buttons 5V ----- TO ------ ESP32 PINs --TO --10ohm resistor ---- GND
5V ------- Button UP ------------- 39 //SVN ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button DOWN ---------- 35 //IO35 ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button LEFT ------------ 36 //SVP. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button RIGHT ---------- 34 //IO34. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button A ---------------- 2 //IO2. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button B ---------------- 14 //TMS. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button START ---------- 15 //TDO. ----/|/\1k Ohm /\/\/\------ GND
5V ------- Button SELECT --------- 13 //TCK ----/|/\1k Ohm /\/\/\------ GND
============
= VIDEO OUT =
============
GPIO26 ------- VIDEO OUT -------- GND
===========================
= The Source-Code here: =
===========================
https://github.com/Djamal-UK/NesCat/archive/main.zip
#esp32_arduino #esp32_nintendo_emulator #esp32_snes_emulator
------------------------------------------------------------------------
About Social Media, Business, and Blogging
------------------------------------------------------------------------
https://www.youtube.com/djamaluk
https://www.facebook.com/Djamal.UK
https://twitter.com/DjamalUK
https://Djamal.UK
Code and Schematic OR Any Questions Please let me know in the comment section below
Thank you everyone for stopping by my youtube channel I would love to hear from you, so leave a comment to let me know you were here!
Видео A Tiny ESP32 Handheld NES Emulator for the ESP32 канала Djamal.Uk
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DAVE OLD MS-DOS GAME ON ESP32 VGA OUTATtiny85 Game ConsoleAttiny Arcade keychain game #DIY #ATtiny85Arduino TETRIS | The addictive puzzle video gameATtiny85 Hat Trick Video Game be credited to Daniel on GPLv3 LicenceCANARY SINGING - DIY POWERED BY WATER | NO BATTERIES REQUIREDSpeaking Calculator project for blind people using Arduino Uno AVR ATmega328 MicrocontrollerTinyConsole is a miniature game system the size of a credit cardDo it Yourself - a DIY Game Console Arduino ATtiny85 and Raspberry Pi Based - CollectionATtiny85 - based Space Invaders mini game consoleRun Dude - ATtiny85Let's time travel back to the 80's again by creating your own Pocket SID Audio PlayerPlay ARKANOID Breakout on this ATtiny85 - based mini Game ConsoleBuilding excellent replica Donkey Kong arcade machine based on Parallax Propeller Microcontroller#TinyConsole_V2 Automatic Game Uploader NO PC NO Arduino NO softwares Required,The Sokoban game running on Arduino using 128x64 oled displayFrogger | Game on ATtiny85 Running simple Arduino programsGamebuino TV Clone - Play Games, Quick & Easy! with ArduinoPlay Games on this ATtiny85 - based business card Game Console ArduinoPlay Crazy Tetris Game - LilyGO TTGO T-Display ESP32Arduboy DIY The Ballon Boy " Game dev Kit ( VIDEO Part - 2 )