Replacing Brushless Motor Bearings Without A Press

Here is how I change my brushless motor bearings using a bolt and some washers. The end result is perfectly installed bearings just like you would have if you used an expensive press.

When choosing a bolt, make sure you get a metric bolt that is the same thickness as your motor shaft. For example my shaft was 3mm thick so the bolt I used was a M3 metric bolt. The length of the bolt will depend on your motor. For most 2204 to 2206 motors the length will be either a M3x30mm or M3x35mm bolt.

Some websites I use to purchase bearings
RMRC - https://www.readymaderc.com/store/index.php?main_page=index&cPath=505_506_516_847
GetFPV - http://www.getfpv.com/motors/accessories-and-parts.html
Banggood - (Emax bearings but you can search for what size you need) - http://www.banggood.com/Emax-Bearing-for-RS2205-2300KV-RS2205-2600KV-Brushless-Motor-p-1053018.html?p=3827048207257201612A

Random tips playlist - https://www.youtube.com/playlist?list=PLiYYhnH4BhI9HjbVF3L8czgQ7H0Yhh2RH

All my playlists - https://www.youtube.com/channel/UCObMtTKitupRxbYHLlwHE3w/playlists
Video editor - http://amzn.to/2n7sUiF
My personal vlog channel - http://www.youtube.com/c/JcOfficial3

Видео Replacing Brushless Motor Bearings Without A Press канала Project Blue Falcon