Zylinderkopfschraubenrettung luftgekühlter Deutzmotor
Welche Möglichkeit hat man, wenn eine Zylinderkopfschraube sich nicht los drehen lässt oder schon abgedreht ist? Dieses Filmchen erklärt , wie ich es bei einem Deutzmotor mache.
Cylinder head bolts will not go off.
What options do you have?
1. broken screw, not the block, strongly heat with a burner. Several times, at least 5 x. Allow to cool again. The steel contracts and it is possible that this will cause the screw to turn.
2. Edit screw with jackhammer. 2nd man simultaneously turns screw head.
Видео Zylinderkopfschraubenrettung luftgekühlter Deutzmotor канала 050607dx
Cylinder head bolts will not go off.
What options do you have?
1. broken screw, not the block, strongly heat with a burner. Several times, at least 5 x. Allow to cool again. The steel contracts and it is possible that this will cause the screw to turn.
2. Edit screw with jackhammer. 2nd man simultaneously turns screw head.
Видео Zylinderkopfschraubenrettung luftgekühlter Deutzmotor канала 050607dx
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Pumpenplatte F2L612 montieren](https://i.ytimg.com/vi/JVz8P1PGn6s/default.jpg)
![Motor Reparatur 5](https://i.ytimg.com/vi/Jaqt7cbOMyE/default.jpg)
![Kopfschrauben anziehen DX4.50](https://i.ytimg.com/vi/cRqTSAWPYa0/default.jpg)
![Deutz D30 - Junge Junge , sowas hab ich auch noch nicht gesehen](https://i.ytimg.com/vi/od6GUEd9gJI/default.jpg)
![Experimente - Deutz D40.2 zündet auf dem 3. Zylinder nicht gut](https://i.ytimg.com/vi/B015mbM4cfM/default.jpg)
![Deutzanlasser beschleunigen (Reparatur)](https://i.ytimg.com/vi/1NcvbfFtlH0/default.jpg)
![Kupplungsreparatur Deutz D25S / F&S KS200](https://i.ytimg.com/vi/wmyA2S1X5F0/default.jpg)
![Deutz 06 und teilweise auch Deutz 05 Abnehmen der Bremstrommel , Howto](https://i.ytimg.com/vi/b3g2RIyjSQs/default.jpg)
![Bosch Reiheneinspritzpumpe Elemente ausbauen z.B. bei Federbruch o Tausch](https://i.ytimg.com/vi/9iHFOQ2newc/default.jpg)
![Deutz Dx 4.50 Motor ,Zylinder mit Kolben und Kopfmontage, Spaltmass messen](https://i.ytimg.com/vi/jfU9GCNwtJg/default.jpg)
![Deutz D30S F2L712 Stößelrohrdichtungen wechseln](https://i.ytimg.com/vi/1vGHOof3GcQ/default.jpg)
![Was gibts denn nun Neues in Zukunft und Düsensitz fräsen](https://i.ytimg.com/vi/ISD5QXJ9XHE/default.jpg)
![DEUTZ F4L912 OVERHAUL](https://i.ytimg.com/vi/NuAfszZr-ek/default.jpg)
![Agrostar 6.81 und was es sonst im Moment so gibt](https://i.ytimg.com/vi/SnMk6zN8-uc/default.jpg)
![Unimog 404, Getriebe komplett demontieren, 5.Gang defekt](https://i.ytimg.com/vi/a3ZNfsnhZWo/default.jpg)
![Deutzmotor ESP Förderbeginn einstellen](https://i.ytimg.com/vi/_POejNfENBE/default.jpg)
![Guss schweißen von Nachbars Trecker](https://i.ytimg.com/vi/YSdWrAS2NOg/default.jpg)
![Motorschaden Reparatur | MC Cormick 324 | HD](https://i.ytimg.com/vi/NzzsCbYkve0/default.jpg)
![Dieselleitung pressen für Deutz D30](https://i.ytimg.com/vi/0nFX8bUErr8/default.jpg)
![Junge , Junge, schon wieder ein neuer Schlepper?](https://i.ytimg.com/vi/TBrXZdk-1GQ/default.jpg)