Connecting big cables to the inverter. Not 100% happy though...
We finally connect the battery with the proper cables to the inverter. It was a bit of a challenge to get all the cables in but a bit of mechanical engineering and it was done. I also had trouble connecting the solar charge controller together with the big cables to the inverter studs. I think, they are not made to hold several terminals at the same time. So this got me thinking of an upgrade to the system...
Please subscribe and join me on my journey of the Off-Grid Garage!
For more information, please check out my website with links to all materials, devices and products: https://off-grid-garage.com
EVE LF280 LiFePO4 cells 3.2V/280Ah: https://off-grid-garage.com/batteries/
Solar, Controllers, Inverters and accessories: https://off-grid-garage.com/solar/
Batteries, chargers and accessories: https://off-grid-garage.com/batteries-3/
Cables, inverters and electronics: https://off-grid-garage.com/electronics/
Tools, analysers and testers: https://off-grid-garage.com/equipment/
Видео Connecting big cables to the inverter. Not 100% happy though... канала Off-Grid Garage
Please subscribe and join me on my journey of the Off-Grid Garage!
For more information, please check out my website with links to all materials, devices and products: https://off-grid-garage.com
EVE LF280 LiFePO4 cells 3.2V/280Ah: https://off-grid-garage.com/batteries/
Solar, Controllers, Inverters and accessories: https://off-grid-garage.com/solar/
Batteries, chargers and accessories: https://off-grid-garage.com/batteries-3/
Cables, inverters and electronics: https://off-grid-garage.com/electronics/
Tools, analysers and testers: https://off-grid-garage.com/equipment/
Видео Connecting big cables to the inverter. Not 100% happy though... канала Off-Grid Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Tutorial: Solar Panel Protection in Series and ParallelHuge Victron MPPT 150/35 problem, small channel problem, Raspberry Pi and bus bars incoming. UPDATE!'The Move'. More equipment inside the cabinet. Will it all work out?Are these the better settings for your solar-battery setup?Everything you need to know about Bluetti's NEW EP500 - reviewFinal work on our 14.5kWh battery - Will it work as expected? #buildthebattery.6Battery terminals, busbars and balance cables - How I do it! Building a 48v/14kWh battery. Part2How To Wire a Camper Van Electrical Distribution PanelHow far to charge and discharge a LiFePO4 cell. Testing the full Charge and Discharge Curves.Experiment Parallel inverter non SYNC...what happen?...KABOMM Part 1Do this and you don't need a BMS 😉This QUCC BMS does not protect my battery! Am I right?Solar Battery Connections Explained: Series Vs. Parallel // Wiring Off Grid Power SystemsBEST SOLAR GENERATOR - Top 8 Best Solar Generators In 2021Breaker Test - Is a cheap Chinese low voltage disconnect/breaker any good ?Additional 12V port installation. A small upgrade for the battery shelf.Shenzen Basen 12V/100Ah and 300Ah LiFePO4 batteries. Double experience with unexpected results!VAN BUILD PRO TIPS • Electrical And Solar Install Common MISTAKESBMS 101 - there is a problem #buildthebattery.5.2