Simple Router Sled Jig For Flattening End Grain and Small Slabs

I made this simple router sled jig for flattening slabs and cutting boards, and in this video, I walk you through my process on how I put it all together. Everything is made with leftover 3/4" plywood and fastened with 1-1/4" inch and 2-1/2" screws, with a generous coating paste wax. Let me know if you have any questions in the comments!

Etsy Shop || https://www.etsy.com/shop/seasquatchwoodshop
Merchandise Store || https://seasquatch-woodshop.myspreadshop.com/
Website Shop || https://www.seasquatchwoodshop.com/store/

Tools and Materials (These are not affiliate links)

Paste Wax || https://www.amazon.com/gp/product/B005SRV1PI/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Toggle Clamps || https://www.amazon.com/gp/product/B076H3WRLZ/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1

Surfacing Bit || https://www.amazon.com/gp/product/B07VCZVKL7/ref=ppx_od_dt_b_asin_title_s01?ie=UTF8&psc=1

Sound effects:
https://www.mixkit.co/
https://www.fiftysounds.com/
https://www.freesound.org/

Видео Simple Router Sled Jig For Flattening End Grain and Small Slabs канала Seasquatch Woodshop