Fixe Hardware's New 316L Stainless Climbing Hanger

Yes I moved, Yes we removed this concrete. Almost done releasing episodes from the old house!

Bobby visited Fixe Hardware's Bishop, CA store and they showed him their new hanger which is a result from the new standards in Europe since PLX has come and gone. 3.5mm round stock (instead of 4mm) with rounded edges and a concave feature with dimples to act like a built in lock washer. So... thinner and fancier and a better stainless.
Hangers in this episode - https://fixehardware.com/index.php/016-3-8.html
Bolts in this episode - Simpson Strong-Tie Titen HD Concrete screws
--Zinc Plated https://amzn.to/3rd5Wqb (DON'T USE ZINC PLATED FOR PERMANENT ANCHORS)
--Stainless concrete screws https://amzn.to/2OX2GC5

00:00 - Cheesy Intro
00:21 - Concrete slab moving again
01:07 - All about the hanger
04:22 - Bolt Buster Hydraulics
05:53 - Break Tests Begin
08:31 - Concrete Screws
09:50 - Final Break Test
10:44 - Closing up
11:34 - Annoying ending

BREAK TEST RESULTS
MBS - 25kn
*Installed Offset (not oriented straight) - did not spin to correct orientation before deforming but broke stronger
***Sample 321 - 39.06kn (8,781lbf)
***Sample 325 - 39.34kn (8,843lbf)
*Installed Straight and Proper (yes it was lower, but higher than MBS)
***Sample 322 - 30.08kn (6,762lbf)
***Sample 323 - 29.06kn (6,532lbf)

Learn more about bolting for climbing and slacklining at https://www.slackline.com/boltingbible - new 2021 version coming out in a few weeks.

No sponsors, no affiliate links with Fixe. Please donate at https://www.SLACKLINE.com/donate

Видео Fixe Hardware's New 316L Stainless Climbing Hanger канала HowNOT2