3D-Printed 1/200 scale IJN Yamato Battleship Model ( Static and Radio Control, Remote-controlled )

1/200 Scale Yamato Battleship for static and Radio Control ( RC ) model step file for 3D printing ( Step files help maintain a better surface finish when printing )
Link buy files : https://cults3d.com/:4185106

・Total length: 131cm
・Full width: 19cm
・Total height: 26cm

Due to its large size, the hull of the ship is printed using FDM technology, while the rest is printed using SLA technology for a better surface finish. If you don't have an SLA printer, you can try printing everything using FDM.

I used ABS for hull, but PETG is Ok

Material: PETG, ABS
Layer: 0.2
Wall: 4
Top/Bottom: 5
Infill: 15%

Can be painted or coated with epoxy on the outside → 100% waterproof

The ship is powered by four DC motors and one servo controlling the rudder. I planned to make the radar rotate 360 ​​degrees and the gun turrets rotate 180 degrees, but I haven't had time yet. So, if you have some mechanical knowledge, please try to build it.

#3dprinting #3d #warship #battleship #radiocontrol #navy #ijn #rc #naval #slaprint #diy #yamato #printing #resinprinting #scalemodel #remotecontrol

Видео 3D-Printed 1/200 scale IJN Yamato Battleship Model ( Static and Radio Control, Remote-controlled ) канала hanajp