Sock Repair: Duplicate Stitch

This sock is “pre-hole”. This is the point of wear when the stitches are so thin they are almost opaque. It’s a great time to fix this sock before an actual hole appears.

0:29
Materials/tools required: it’s very helpful to have a darning egg, or a lightbulb if you can’t get your hands on an actual darning egg. Also needed: a wool needle and a little more sock yarn.

1:11
How to embroider over the worn stitches using a technique called “duplicate stitch”. This repair method reinforces the worn area. Cynthia is using more sock yarn to do this repair, which results in a patch that is a little thicker creating a nice padded area. You can also use 2 ply repair yarn but Cynthia finds using left over sock yarn effective and practical.

Cynthia recommends starting the duplicate stitching at the bottom of the hole and working upwards.

8:05
A quick review of how to perform duplicate stitch and what to do when your repair thread/yarn runs out.

10:20
Reinforcing a thin spot on the bottom of sock using a highly contrasting yarn. Cynthia demonstrates a technique called “duplicate stitch” to embroider over the stitches in a spot on a sock that is wearing very thin. The high contrast yarn helps you to see the technique better.

15:26
Completed section of reinforcement. Now all that’s left is weaving in the tails!

River City Yarns
http://www.rivercityyarns.com

Видео Sock Repair: Duplicate Stitch канала River City Yarns