Schaublin SV52 milling machine hi speed head - part 1
I purchased a high speed milling head for my Schaublin 52 mill.
The head is from a 53 and has a different drive attachment than the 51 and 52 mills that preceeded the 53 and 53N. I gave this some thought, consulted some pro-machinists to get their opinion on how to connect the 2 parts. I then concluded that the best was to make up an adapter to fit the rectangular drive on my mill to the dog clutch like drive on the head. Since this takes some room, I also need to make an adapter plate for the mounting surfaces. This is one of the remaining projects I will do for this machine. I am also strongly thinking about a one-shot lube system (I have a already discovered it takes awhile to go through all the oiling points and as my other mill had this kind of system I could really value this). Other smaller projects are T-nuts (12mm, but of course different also, so..) and way covers
Видео Schaublin SV52 milling machine hi speed head - part 1 канала Jan Sverre Haugjord
The head is from a 53 and has a different drive attachment than the 51 and 52 mills that preceeded the 53 and 53N. I gave this some thought, consulted some pro-machinists to get their opinion on how to connect the 2 parts. I then concluded that the best was to make up an adapter to fit the rectangular drive on my mill to the dog clutch like drive on the head. Since this takes some room, I also need to make an adapter plate for the mounting surfaces. This is one of the remaining projects I will do for this machine. I am also strongly thinking about a one-shot lube system (I have a already discovered it takes awhile to go through all the oiling points and as my other mill had this kind of system I could really value this). Other smaller projects are T-nuts (12mm, but of course different also, so..) and way covers
Видео Schaublin SV52 milling machine hi speed head - part 1 канала Jan Sverre Haugjord
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Schaublin SV52 High speed head - part 2Schaublin 52 action again, this time machining a short Kingway straightedgeВФГ на фрезерный станок 6р81FUM0001 Schaublin SV-51 ArrivesFUM0053 Schaublin HeadTear Down and Rebuild of Tree Milling Machine HeadHigh-speed spindle on the milling machineSchaublin 53, taillage d'engrenage 1ère partiePrésentation de ma Schaublin53Myford Super 7 - Tailstock restoration - part 1 - scraping and initial testingSchaublin 53 тест, демонстрация.Machinist Hammer - Part 1A Mill is a Lathe!How to Use a Dividing HeadFastest CNC Lathe Machine Working, Modern Technology CNC Milling Machine MetalSchaublin 53, taillage d'engrenage 2ème partieФрезерный станок 6 р81 с вертикальной головойMaking a Vise Stop Part 1Токарный станок ЗИМ-466 копия Schaublin 102(покупка)5ème partie, outil à brocher