DIY Carbon Fiber Car Hood (Ep. 58)
In this episode, I make a carbon fiber hood skin for my Volvo 122 project. I don't spare the details - and show how you can get this job done in your garage. All products used in the video are listed below and were purchased from Composite Envisions (https://compositeenvisions.com/)
Special thanks to Joel Marsh of Marsh Composites (http://www.marshcomposites.com/)
Composite Envisions
https://compositeenvisions.com/
Squeezee Line Clamp
https://compositeenvisions.com/squeezee-line-clamp-for-06-hose-1642.html
Carbon Fiber 5 Harness Satin F-2212
Hexcel HiMax Carbon Fiber Biaxial +- 45°
Pro-Set INF-114 Infusion Epoxy with INF-212 Slow Hardener
Freekote 700-NC - Release agent
Freekote FMS - Mold sealer
Airtech Stretchlon 800 bagging film
Airtech AT200Y Tacky Tape
Airtech Resinflow 60 Resin Flow Medium
Airtech Bleeder Lease B Coated Peel Ply.
Duratec Grey VE Primer
Please consider supporting the channel through our merchandise.
https://teespring.com/en-GB/throttle-stop-garage-volvo-can?tsmac=store&tsmic=throttle-stop-garage#pid=46&cid=2745&sid=front
Видео DIY Carbon Fiber Car Hood (Ep. 58) канала Throttle Stop Garage
Special thanks to Joel Marsh of Marsh Composites (http://www.marshcomposites.com/)
Composite Envisions
https://compositeenvisions.com/
Squeezee Line Clamp
https://compositeenvisions.com/squeezee-line-clamp-for-06-hose-1642.html
Carbon Fiber 5 Harness Satin F-2212
Hexcel HiMax Carbon Fiber Biaxial +- 45°
Pro-Set INF-114 Infusion Epoxy with INF-212 Slow Hardener
Freekote 700-NC - Release agent
Freekote FMS - Mold sealer
Airtech Stretchlon 800 bagging film
Airtech AT200Y Tacky Tape
Airtech Resinflow 60 Resin Flow Medium
Airtech Bleeder Lease B Coated Peel Ply.
Duratec Grey VE Primer
Please consider supporting the channel through our merchandise.
https://teespring.com/en-GB/throttle-stop-garage-volvo-can?tsmac=store&tsmic=throttle-stop-garage#pid=46&cid=2745&sid=front
Видео DIY Carbon Fiber Car Hood (Ep. 58) канала Throttle Stop Garage
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY Carbon Fiber Car Hood: Part 2. (Ep. 59)BMW Carbon Fibre (CFRP) - PRODUCTIONCarbon Fiber Epoxy Table Step-By-StepMaking Complex Carbon Fibre Tubes Using a Split-MouldDIY Carbon Fiber Fenders (Ep. 53)How To Do Perfect Vacuum Resin Infusion of a Carbon Fibre (Fiber) Part - Basic TutorialHOW TO BUILD A FULL CARBON FIBER WING (Using Styrofoam) - Infamous Ep. #2Carbon Fiber Construction - /INSIDE KOENIGSEGGMaking Fiberglass Body Panels Ep 1. Roof MoldHow to Paint a Carbon Fibre HoodDIY Carbon Fiber Intake Manifold: Part 2 Making the carbon fiber plenum.Mold Making for Carbon Fiber Infusion. Please watch the version with fixed sound. Linked below.How to Manufacture a Car Hood (Drag Car) - Resin Infusion ProcessCarbon Fiber Car Mirror Cover Lessons LearnedHow to Make a Carbon Fiber Parts Clone [DIY] (Making Mold & Air Scoop)Ultimate Carbon Fibre Skinning/Wrapping Tutorial - Sofie's Rifle StockHow to Make a Carbon Fiber Car Bonnet/Hood - Part 1/3 : Making the MouldSpeed Academy 1977 Toyota Celica DIY Carbon Fiber RoofDIY Carbon Fiber Intake Manifold: 3D Printed Plug and Mold Making (Ep.71)