Pressing 1mm thin powdermetal discs on a KOMAGE S120 2E (Hydraulic Press)

Compacting of thin metal discs on a KOMAGE S120 hydraulic press with 2 levels, including handling, 4-point measurement and weighing of the parts

General information:
Powder metallurgy is the largest sector in powder pressing technology with annual growth rates rising. The largest share goes to the automotive industry, which accounts for 70 - 80% of the total capacity. The remainder is divided between mechanical engineering (approx. 15%) and the electrical industry (approx. 5%) and other sectors. As molded parts for the automotive sector in particular are taking on increasingly complex geometries, Komage with its hydraulic multi-level ejection presses provides the most flexible answer to productivity and quality requirements in the production of these products. Free holding of all pressing axes in the press position is particularly important here as the pressure on the pressing punches can be relieved in both axial directions.

For more information visit: www.komage.de

Видео Pressing 1mm thin powdermetal discs on a KOMAGE S120 2E (Hydraulic Press) канала Komage Gellner Maschinenfabrik KG