How to Remove GY6 Flywheel, Stator, Oil Pump, & Starter Clutch on 157QMJ

Thank you for watching and supporting my channel feel free to use my referral links. If you need help with any of these products call or text me Mike (209) 355-8088. I usually respond within 24 hrs.

---------------------------DO IT YOURSELF---------------------------
Time Required: 60-120mins.
Skill Level: Advance

Chemical Used:
• Bel-Ray Oil Exl Mineral 4T 10W-40 https://amzn.to/2TPO6dZ
• CRC Freeze-Off Super Penetrant https://amzn.to/2wn3BSN
• CRC Sta-Lube Anti-Seize Engine Assembly Lube https://amzn.to/2uK30Kp
• CRC Sta-Lube Moly-Graph Grease https://amzn.to/2uJlkTQ
• CRC Throttle Body and Air-Intake Cleaner https://amzn.to/2x5HMrd
• Loctite Heavy Duty Threadlocker Blue 242 https://amzn.to/2TqYtF3
• Mobil 1 Synthetic Gear Lube 75W-90 https://amzn.to/38yHtCh
• Mobil 1 Synthetic Grease https://amzn.to/38h6ilO
• Permatex Copper Spray-A-Gasket Hi-Temp Sealant https://amzn.to/2wkt4Mw
• Permatex Dielectric Tune-Up Grease https://amzn.to/39CcA14
• WD-40 Specialist Penetrant Spray (Blu Torch) https://amzn.to/3cotcLn
• Scott Shop Towels https://amzn.to/32Hjwau (optional)

Parts Used:
• Ban Jing High Torque Starter Motor https://goo.gl/wTTSJn
• Ban Jing Starter Clutch Heavy Duty http://bit.ly/3cJUxYz
• Dowel Pins 8x10mm Set http://bit.ly/39B3oKf
• Hoca Crankshaft 2.5mm Stroker https://goo.gl/1unUmv
• Koso Super Flow Oil Pump https://goo.gl/GTWZdB
• MotoForce CVT\Flywheel Nut M12x1.25 Serrated http://bit.ly/3cLiC1a
• NCY Engine Gasket 61mm Set https://goo.gl/Jqp2Js
• Oil Chain 22 Links https://goo.gl/ozLb65
• Performance Oil Seal Set http://bit.ly/2VCyxsI
• Starter Clutch Nut http://bit.ly/3cJTlo8
• Woodruff Keys http://bit.ly/39yuaDe

Add-on (optional):
• SSP-G 180cc Big Bore Power Kit http://bit.ly/2v5ZCd1
• Rocker Arms Tappets, Inlets, Outlet https://goo.gl/PG17mt
• Chain Guide (standard) https://amzn.to/2uJDR2i
• Crankcase Bushing 3-Piece Set http://bit.ly/2Qe6rRd
• Dowel Pins 10x14mm Set http://bit.ly/39CKaE5
• NGK Spark Plug Iridium CR7HIX http://bit.ly/2TOopup
• NCY Super Transmission Set https://goo.gl/hFUSqB
• Bando 835-20-30 CVT Drive Belt https://goo.gl/dHKAUv
• CVT Cover Anklebiter Ultimate http://bit.ly/3aG1qIQ
• CVT Cover (longcase) https://amzn.to/2VUkNcP
• CVT Cover Gasket (longcase) http://bit.ly/2PWLYQH
• Dr. Pulley 18x14 Sliding Weight 12gm Set https://goo.gl/1jY5Vh
• NCY Clutch Bell PTFE Coated Racing Star http://bit.ly/39DtCfo
• NCY Clutch Springs 1000 RPM Blue http://bit.ly/3aBUVqn
• NCY Compression Spring 1500 RPM http://bit.ly/2v5Vbil
• NCY Drive Face CNC-Machined Alumin http://bit.ly/2PYoH0q
• NCY Clutch Nut 39mm http://bit.ly/38tpwVG
• NCY Gear Set 15*37 https://goo.gl/U4yPyj
• Taida Rear Drive Bearing https://goo.gl/yf3qxX
• Zip Ties 12" https://amzn.to/32GtBo5

Tools Used:
• 8mm Hex Socket https://amzn.to/39AuO34
• 7mm, 8mm, 10mm, 12mm Sockets w/4" ext. Wrench https://amzn.to/2vow36J
• 5/16", 9mm Open and Adj. Wrench https://amzn.to/2vow36J
• 5/8" Spark Plug Socket https://amzn.to/2LT2kan
• Bearing Separator and Gear Puller Set https://goo.gl/Vs6C6Y
• Big Head Phillip Screw Driver https://amzn.to/2vow36J
• Cable Lube Tool https://amzn.to/2WBvpxy
• Feeler Gauge .004, .005, .006 https://amzn.to/2wjyiIq
• Flat-Head (narrow) https://amzn.to/2vow36J
• Flywheel Puller https://goo.gl/GNToF7
• Heat Gun https://amzn.to/2uHQU4i
• Hydraulic Compression 12-Ton https://amzn.to/3axX8mT
• Impact Drill https://amzn.to/2wsdfDp
• Impact Socket 17mm https://amzn.to/2uReXOu
• Impact Socket 39mm https://amzn.to/2PXNjX8
• Mallet Hammer https://amzn.to/38gJumk
• Multimeter https://amzn.to/2xe4qhc
• Needle-nose Pliers https://amzn.to/2vow36J
• Oil Cannister Pump https://amzn.to/334xxPz
• Oil Drain Pan https://amzn.to/330TEGM
• Oil Funnel https://amzn.to/2vR8D9Z
• Propane Torch https://amzn.to/38g4bPw
• Seal Driver #4, #6, #7 Set Kit https://amzn.to/38gxwJq
• Slide Hammer and Bearing Puller Set https://amzn.to/2x53xHE
• Starter Clutch Nut Socket 3.25” min-ext https://goo.gl/5rMgtS
• Torque Wrench 5-35’ Foot Pounds https://amzn.to/32O0FL8
• Variator Tool http://bit.ly/3cqJHGY

---------------------------
Need more info on GY6 BIG BORE KITS?
Visit our Blog Share: http://ncystore.com/blog

Видео How to Remove GY6 Flywheel, Stator, Oil Pump, & Starter Clutch on 157QMJ канала NCY STORE