Axial SCX24 Mod19 Microshark Build!
I build a custom Axial SCX24 using Mod19's Microshark conversion kit. This is a fun and rewarding upgrade to the very cool SCX24 platform. Printed at Shapeways, this tube chassis buggy makes the SCX24 not only look better, but much more performance oriented!
Check out the complete step by step build on the forum here: https://scalebuildersguild.com/forum/showthread.php?29352-Official-Micro-Shark-Build-Guide
Buy all the Mod19 Microshark printed parts required here: https://www.shapeways.com/shops/mod19-rc?section=Micro+Shark+SCX24+Parts&s=0
Parts list:
1) Complete SCX24 (duh!) ***Deadbolt version only until I can confirm more about the new JL Wrangler***
2) Mod19RC Shapeways Parts
- Micro Shark Frame for SCX24
- Chassis Parts for Microshark Conversion (not optional!)
- Hood and Grille for Micro Shark (Type S or Type T)
- Roof + Rear Panel for Micro Shark
- Left Body Panel (Type S or Type T)
- Right Body Panel (Type S or Type T)
- Fuel Cell + Cooler Rear Cover for Micro Shark(optional)
- Seats for Micro Shark(optional)
- Dash for Micro Shark(optional)
- EMax ES08MAii Servo Mount for Micro Shark
- SCX24 Improved Steering Links (recommended)
3) M1.2x3 Flat Head Screws. Here is the best source that I have found.https://www.metricscrews.us/index.ph...vudl7ik2no6The head shape and diameter are important, as that is what things were designed to. These require a 00 Phillips screwdriver to install. You need (32) of them, but order extra...they are small and elusive.
4) Servo https://www.amainhobbies.com/emax-es...v-0275/p667829 The mount and chassis are designed to fit this servo.
5) Connectors/Leads to make battery wire extension.https://www.amazon.com/dp/B07NWD5NTN...NsaWNrPXRydWU=
6) 1mm Diameter Drill Bit. for cleaning out holes of 3D printed parts.
7) You may want to consider a set of Mil Stone Wideners if you plan on using the stock wheels and tires. They can be found on ebay and there is a set specific to the SCX24. https://www.ebay.com/itm/Axial-SCX24...8AAOSw6TtdQeai
Our merch is super cool: https://teespring.com/stores/scale-builders-guild
#axialscx24
#scalebuildersguild
Buy my gear here:
Sony a6500 https://amzn.to/2u9Rsfs
16mm Sigma https://amzn.to/2UFv5dD
55-210mm Sony https://amzn.to/2TH8DUR
Rhode Video Mic: https://amzn.to/2W56DlX
Zhiyun Crane https://amzn.to/2TIaxo9
GoPro Hero 6 Black https://amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
https://amzn.to/2udpvn4
Fall 2019 Stickers are sold (already) out but we're still offering patches! Check them out here: https://scalebuildersguild.com/forum/showthread.php?28302-SBG-Patches-2019
► Follow us on Instagram! http://www.instagram.com/scalebuildersguild
► Follow us on Facebook! http://www.facebook.com/scalebuildersguild
► Join our forum!
http://www.scalebuildersguild.com/forum
► Merch available here:
https://teespring.com/stores/scale-builders-guild
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
Видео Axial SCX24 Mod19 Microshark Build! канала Scale Builder's Guild
Check out the complete step by step build on the forum here: https://scalebuildersguild.com/forum/showthread.php?29352-Official-Micro-Shark-Build-Guide
Buy all the Mod19 Microshark printed parts required here: https://www.shapeways.com/shops/mod19-rc?section=Micro+Shark+SCX24+Parts&s=0
Parts list:
1) Complete SCX24 (duh!) ***Deadbolt version only until I can confirm more about the new JL Wrangler***
2) Mod19RC Shapeways Parts
- Micro Shark Frame for SCX24
- Chassis Parts for Microshark Conversion (not optional!)
- Hood and Grille for Micro Shark (Type S or Type T)
- Roof + Rear Panel for Micro Shark
- Left Body Panel (Type S or Type T)
- Right Body Panel (Type S or Type T)
- Fuel Cell + Cooler Rear Cover for Micro Shark(optional)
- Seats for Micro Shark(optional)
- Dash for Micro Shark(optional)
- EMax ES08MAii Servo Mount for Micro Shark
- SCX24 Improved Steering Links (recommended)
3) M1.2x3 Flat Head Screws. Here is the best source that I have found.https://www.metricscrews.us/index.ph...vudl7ik2no6The head shape and diameter are important, as that is what things were designed to. These require a 00 Phillips screwdriver to install. You need (32) of them, but order extra...they are small and elusive.
4) Servo https://www.amainhobbies.com/emax-es...v-0275/p667829 The mount and chassis are designed to fit this servo.
5) Connectors/Leads to make battery wire extension.https://www.amazon.com/dp/B07NWD5NTN...NsaWNrPXRydWU=
6) 1mm Diameter Drill Bit. for cleaning out holes of 3D printed parts.
7) You may want to consider a set of Mil Stone Wideners if you plan on using the stock wheels and tires. They can be found on ebay and there is a set specific to the SCX24. https://www.ebay.com/itm/Axial-SCX24...8AAOSw6TtdQeai
Our merch is super cool: https://teespring.com/stores/scale-builders-guild
#axialscx24
#scalebuildersguild
Buy my gear here:
Sony a6500 https://amzn.to/2u9Rsfs
16mm Sigma https://amzn.to/2UFv5dD
55-210mm Sony https://amzn.to/2TH8DUR
Rhode Video Mic: https://amzn.to/2W56DlX
Zhiyun Crane https://amzn.to/2TIaxo9
GoPro Hero 6 Black https://amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
https://amzn.to/2udpvn4
Fall 2019 Stickers are sold (already) out but we're still offering patches! Check them out here: https://scalebuildersguild.com/forum/showthread.php?28302-SBG-Patches-2019
► Follow us on Instagram! http://www.instagram.com/scalebuildersguild
► Follow us on Facebook! http://www.facebook.com/scalebuildersguild
► Join our forum!
http://www.scalebuildersguild.com/forum
► Merch available here:
https://teespring.com/stores/scale-builders-guild
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
Видео Axial SCX24 Mod19 Microshark Build! канала Scale Builder's Guild
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Axial SCX24 Micro Shark from Mod19RC Full Build: WOW!!](https://i.ytimg.com/vi/9rLnSUXvsSE/default.jpg)
![Axial SCX24 Budget Build Off Ep1](https://i.ytimg.com/vi/0McHzNGG_Zg/default.jpg)
![AXIAL SCX24: BIG MOTOR - AXLE EXTENSIONS - 1/24 SCALE TOYOTA MODEL CONVERSION](https://i.ytimg.com/vi/zE9HuTDxkCc/default.jpg)
![What's on the Bench! Ep5](https://i.ytimg.com/vi/H3W0y0eNPCM/default.jpg)
![SSD Trail King Build & Review](https://i.ytimg.com/vi/x6yIVYZgNDc/default.jpg)
![Best SCX24 Shock? Kinetic Double Barrel Shock Upgrade Test!](https://i.ytimg.com/vi/vM0zcRNa6A8/default.jpg)
![Axial SCX24 Budget Build - Going All In! - Week 8 - Finale](https://i.ytimg.com/vi/wJ7RxfZctmM/default.jpg)
![AXIAL SCX24: MICRO SHARK Conversion: Power Hobby Suspension Upgrade](https://i.ytimg.com/vi/6KTa75qDTj4/default.jpg)
![Axial SCX24 Budget Build - Upgraded Motor - Week 6](https://i.ytimg.com/vi/e6zL9zQk8fc/default.jpg)
![AXIAL SCX24: 1/12 Scale Suzuki ATV Toy To RC Conversion](https://i.ytimg.com/vi/EJMPCNcn32Q/default.jpg)
![SCX24 Deadbolt - Rig Rundown/Build Bio UPDATE v3.0](https://i.ytimg.com/vi/QAd_-aZzC5k/default.jpg)
![Scx24 tips! (what to know before you buy)](https://i.ytimg.com/vi/pA7prUqqLmQ/default.jpg)
![Little Guy SCX24 tires! Any good? Size comparison and first run!](https://i.ytimg.com/vi/t1_8A4Zedxs/default.jpg)
![No, This is My Most Capable SCX24!](https://i.ytimg.com/vi/ykv7yRx15Ug/default.jpg)
![Best Axial SCX24 Upgrades and mods - best micro crawler](https://i.ytimg.com/vi/VRK2cTu1IPc/default.jpg)
![Axial SCX24 Budget Build - Servo & ESC Upgrades - Week 7](https://i.ytimg.com/vi/ms_FmboJCTo/default.jpg)
![AXIAL SCX24 C10: UPGRADES FROM HOT RACING AND CC HAND SCALE ACCESSORIES](https://i.ytimg.com/vi/IIa_7kVHrCk/default.jpg)
![SCX24 Flex Blades! Do they work?](https://i.ytimg.com/vi/sJrnGmPBGnk/default.jpg)
![SCX24 Shock Options! What Should You Buy?](https://i.ytimg.com/vi/1ToPgN8BSKc/default.jpg)
![Is This REALLY The BEST Micro RC Rock Crawler Car?](https://i.ytimg.com/vi/bx6UqAMsRLw/default.jpg)