CCNA Topics – Connect a Layer 3 Switch to the Internet
https://sites.google.com/site/kmsipnet/
Connect a Layer 3 Switch to the Internet
Here is the configuration of LAYER_SWITCH
hostname LAYER3_SWITCH
!
ip routing
!
interface FastEthernet0/1
no switchport
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/11
switchport access vlan 10
switchport mode access
!
interface FastEthernet0/12
switchport access vlan 20
switchport mode access
!
!
interface Vlan10
ip address 192.168.10.1 255.255.255.0
!
interface Vlan20
ip address 192.168.20.1 255.255.255.0
!
router ospf 1
log-adjacency-changes
network 192.168.0.0 0.0.255.255 area 0
!
ip route 0.0.0.0 0.0.0.0 192.168.1.2
!
Here is the configuration of the INTERNET_ROUTER
hostname INTERNET_ROUTER
!
interface FastEthernet0/0
ip address 51.1.1.1 255.255.255.0
ip nat outside
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.168.1.2 255.255.255.0
ip nat inside
duplex auto
speed auto
!
router ospf 1
log-adjacency-changes
network 192.168.1.2 0.0.0.0 area 0
network 51.1.1.1 0.0.0.0 area 0
!
ip nat inside source list 1 interface FastEthernet0/0 overload
!
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 192.168.20.0 0.0.0.255
Видео CCNA Topics – Connect a Layer 3 Switch to the Internet канала Moustapha Fall
Connect a Layer 3 Switch to the Internet
Here is the configuration of LAYER_SWITCH
hostname LAYER3_SWITCH
!
ip routing
!
interface FastEthernet0/1
no switchport
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/11
switchport access vlan 10
switchport mode access
!
interface FastEthernet0/12
switchport access vlan 20
switchport mode access
!
!
interface Vlan10
ip address 192.168.10.1 255.255.255.0
!
interface Vlan20
ip address 192.168.20.1 255.255.255.0
!
router ospf 1
log-adjacency-changes
network 192.168.0.0 0.0.255.255 area 0
!
ip route 0.0.0.0 0.0.0.0 192.168.1.2
!
Here is the configuration of the INTERNET_ROUTER
hostname INTERNET_ROUTER
!
interface FastEthernet0/0
ip address 51.1.1.1 255.255.255.0
ip nat outside
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.168.1.2 255.255.255.0
ip nat inside
duplex auto
speed auto
!
router ospf 1
log-adjacency-changes
network 192.168.1.2 0.0.0.0 area 0
network 51.1.1.1 0.0.0.0 area 0
!
ip nat inside source list 1 interface FastEthernet0/0 overload
!
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 192.168.20.0 0.0.0.255
Видео CCNA Topics – Connect a Layer 3 Switch to the Internet канала Moustapha Fall
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Multilayer Switching in Packet Tracer 6.1Connect Cisco Router and Switch to ISP Home Router and Access InternetConfigure Layer 3 Switching and inter-VLAN RoutingCCNA Voice – How to setup a basic Voice Over IP network in Packet TracerManaged VS Unmanaged Switches and Support For InterVLAN Routing / Layer Three Switch RoutingFundamentals of SD-WANNetwork#23: NAT - PAT - & Layer 3 switchConfigure VLAN | Allow VLANs to Access InternetBeginner's Guide: How To Mine Ravencoin With NVIDIA Graphics CardsConnect Cisco Router & Switch to ISP Home Router and Access InternetDifference Between Layer 2 Switch & Layer 3 Switch | Difference Between Layer 3 Switch & RouterInter-VLAN RoutingHow to Make Molding with a Router & Build a Picture FrameDO NOT design your network like this!! // FREE CCNA // EP 6Inter-VLAN Routing using a Multi-Layer Switch | Cisco CCNA 200-301Cisco Layer 3 Switch - Introduction & Basic configCCNA/CCENT 200-120: Layer 3 Switching 41/84 Free Video Training CourseHow to Configure Internet Access on Cisco Router(Overload NAT)layer 3 switch InterVLAN Routing and connection to ISP or Internet