862 Heads 215cc 2.00/1.55 LS1 500 whp
862 heads being setup on a Max effort Pump Gas LS1 build. 2.00” Manley Pro Flow and OEM 1.55” valves.
Mulled to true the deck surface only.
Ports 215cc Intake @.600” 300 cfm 82cc Exhaust ports 215+ cfm.
Goal is 500 whp through a T-56 👍😎
Making 11.20-1 compression work on Pump Gas by using the cam timing to control the Dynamic Compression Ratio.
Видео 862 Heads 215cc 2.00/1.55 LS1 500 whp канала HeadFlowInc
Mulled to true the deck surface only.
Ports 215cc Intake @.600” 300 cfm 82cc Exhaust ports 215+ cfm.
Goal is 500 whp through a T-56 👍😎
Making 11.20-1 compression work on Pump Gas by using the cam timing to control the Dynamic Compression Ratio.
Видео 862 Heads 215cc 2.00/1.55 LS1 500 whp канала HeadFlowInc
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Porting 862’s Bowl cuts & Raising the roof
650whp "Moderate" Naturally Aspirated LS Build!
Which head is best on your Gen III LS swap?
LS 5.3L Build Part 6 862 Heads and Rockers | Project Rowdy Ep010
862 heads 2.00/1.57 Valves FAIL
Junkyard LS 862 Head Rebuild pt1
MAX FLOW 6.0! FACTORY LS HEAD SHOOTOUT!
243/799 Heads Porting Step 1
JUNKYARD 4.8L & 5.3L POWER UPGRADES! ADD 130+HP
How to Prepare a Junkyard LS engine for Big Power - Complete Rebuild
How-To: Replace Cam Bearings - LS Engine
Porting LS 799/243 heads Step 3 swirl ramp removal
LS3 Hits 393cfm I Found the Issue The Internet Ports heads Part 8
LS engine build recipes on a budget
LOW $ LS TURBO TEST-CHEAP EBAY GT45 VS THE FAST FIVE
LS 225cc heads done 243/799
5.3 706 / 862 heads on a 6.0 LQ4. Why I’m using them! 2001 GMC Sierra C3. S1, E4.
How to port and polish any aluminum LS heads|tips tricks and tools needed
LS heads changing Valve seals in the vehicle. With or W/O Air