Restoring a 30 year old Rotary 4 Post Alignment Lift
I purchased a $2000 RUSTY 4 post Rotary Alignment lift with Center Airjacks and a Hunter 511 alignment machine. Looking back it was a mistake. Restoring it was a way bigger project than I anticipated, but I got it done. I used every rust removal method possible: electrolysis, vinegar, sandblasting, wirewheel and sanding.
I ended up having to replace sections of metal, a cable, a pulley, safety locks, and piston seals. That combined with some automotive primer/paint puts me to around $3200 invested which is nothing compared to the time I have into this thing. I'm glad this project is behind me. It should work well for my personal hobby shop.
Now that I know these things inside and out I'll be doing another video in the near future going over the best way to disassemble/assemble/maintain them. I'll also cover what to look for so you can avoid some of the mistakes I made.
Видео Restoring a 30 year old Rotary 4 Post Alignment Lift канала 802Projects
I ended up having to replace sections of metal, a cable, a pulley, safety locks, and piston seals. That combined with some automotive primer/paint puts me to around $3200 invested which is nothing compared to the time I have into this thing. I'm glad this project is behind me. It should work well for my personal hobby shop.
Now that I know these things inside and out I'll be doing another video in the near future going over the best way to disassemble/assemble/maintain them. I'll also cover what to look for so you can avoid some of the mistakes I made.
Видео Restoring a 30 year old Rotary 4 Post Alignment Lift канала 802Projects
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
JDM folding mirrors on usdm 2.5rsRx7 headlights gone crazyAdding Immobilizer chip to 2004 Subaru Wrx Sti keyTuning my Supra with AEM EMS V2: Part 3 Timing Sync and Idle tablesSubaru Impreza WRX Sti Resin Key Covers (allows for an immobilizer chip in the 2004 titanium key)How to Replace a 98-01 Impreza or Forester AC button bulbReplacing hatch shocks in FD Rx7Installing a double din head unit into my FD RX7Supra MKIV SRD Tuning Undertray Review22B Subaru Impreza GC8 STI replica door sillsSupra MKIV coil and spark plug discussionHomemade 3D Printer Enclosure for a Creality CR-10sInstalling and hot wiring a hellcat Fuel pump in my 3000gt vr4How I installed PTFE fuel lines in my MKIV Supra2.5rs on VEMS dynoBeing Proactive with the Subaru STI WRX Forester EJ25 MotorSti intercooler sprayer wiring for 2.5rs (Manual and Auto buttons)Supra MKIV LED Gauges | Stu Hagan | New Matte Finish styleAdding Leveler motors to my Subaru Impreza GC8 HeadlightsTuning my Supra with AEM EMS V2: Part 1 Preparing car