Installation | LEDGlow Million Color Slimline Wheel Well Lights Add On Lighting Kit

Learn how to install LEDGlow 4pc Million Color LED Slimline Wheel Well Lights to your Million Color Slimline Underglow Kit for Cars and Trucks.
Get this Wheel Well Light Kit here: https://www.ledunderbody.com/4pc-million-color-led-wheel-well-add-on-lighting-kit-for-slimline-underbody-kits/

LED Wheel Well Light Kit
LEDGlow 4pc Million Color LED Slimline Wheel Well Add-On Lighting Kits are compatible with our Million Color LED Slimline Underbody Lighting Kits. These LED wheel well lights illuminate your car or truck’s fender wells with (4) 24" flexible, waterproof LED lighting tubes. Daisy chains them to the underbody tubes and synchronizes the same custom lighting patterns. Parts for the wheel lights install including wiring, zip ties, and hardware are provided with step-by-step instructions.

LED Wheel Lights Installation
Below you’ll find the recommended steps for installation. If you installed your kit differently or have any tips, let us know by posting in the comments below. You can also contact us via email, social media, or through www.ledunderbody.com. Before getting started, first confirm that you are connecting this wheel well LED light kit to the correct Million Color Slimline underbody kit:

1. Disconnect the batteries before starting the installation.

2. Raising the vehicle will make installation easier but is not necessary for installing this kit.

3. Starting with the driver-side front wheel, disconnect the front underbody tube from the control box and plug the male connector of the wheel well tube into the female connector of the front underbody tube.

4. Connect the female connector of the wheel well tube to the male connector on the control box.

5. Mock up the tube on the wheel well liner and clean the location with an alcohol prep pad.

6. Once the alcohol has dried, remove the red tape cover and firmly press the tube onto the liner.

7. Use the included screws for added security.

8. We recommend securing the wires away from any moving parts inside the wheel well using zip ties or by drilling a small hole next to the tube and feeding the wire to the inside of the fender.

9. To install the rear wheel well tube, disconnect the rear driver side tube, and insert the connectors of the wheel well tube into the open connector of the underbody tube.

10. Mock up the tube on the wheel well liner and clean the location with an alcohol prep pad.

11. Once the alcohol has dried, remove the red tape cover and firmly press the tube onto the liner.

12. Use the included screws for added security and secure the wires.

13. Repeat this process for the passenger side wheel well tubes.

14. For the rear wheel well tube on the passenger side, remove the connector cap from the underbody tube and insert it in the wheel well connector at the back side of the vehicle. Secure the loose wires away from any moving parts.

Compatible Slimline LED Underglow Kits:
Million Color Slimline LED Car Underbody Lighting Kit - https://www.ledunderbody.com/million-color-slimline-led-car-underbody-lighting-kit/
Million Color Slimline LED Truck Underbody Lighting Kit - https://www.ledunderbody.com/million-color-slimline-led-truck-underbody-lighting-kit/

View our entire product lineup at https://www.ledglow.com/

Find us on social:
Facebook - https://www.facebook.com/LEDGlow/
Instagram - https://www.instagram.com/ledglow/
Twitter - https://twitter.com/LEDGlow

#LEDGlow

WARNING: This demonstration is meant to be a guideline. All vehicles are different and professional assistance is highly recommended for installing our kits. As with all of our products, we recommend testing for functionality before starting the installation process.

#ledglow

Видео Installation | LEDGlow Million Color Slimline Wheel Well Lights Add On Lighting Kit канала LEDGlow