Design of Tension Member as per IS800:2007 | Staggered Bolting & Lug Angle Design (Hinglish)
Previous lecture (design of tension member) : https://youtu.be/Y4HHAtCKAdE
This video explains in detail the design of the tension member.
Two numerical are taken one on staggered type bolted connection and the other on lug angle design. For both numerical, Trial section selection, connection design, check for limit state of collapse (i.e. check for Strength due to gross yielding of section (Tdg) Strength due to net section rupture failure(Tdn), and Strength due to block shear(Tdb) ) and check for serviceability (i.e. stiffness or slenderness ratio) were performed.
Standard IS Code is followed for formula and other standard values.
PPT is available to download at the following link.
https://drive.google.com/file/d/11PbDqSLjQlf-8o3XFXQi7_rLLk-2CDTD/view?usp=sharing
Видео Design of Tension Member as per IS800:2007 | Staggered Bolting & Lug Angle Design (Hinglish) канала All-Clear Coaching Classes
This video explains in detail the design of the tension member.
Two numerical are taken one on staggered type bolted connection and the other on lug angle design. For both numerical, Trial section selection, connection design, check for limit state of collapse (i.e. check for Strength due to gross yielding of section (Tdg) Strength due to net section rupture failure(Tdn), and Strength due to block shear(Tdb) ) and check for serviceability (i.e. stiffness or slenderness ratio) were performed.
Standard IS Code is followed for formula and other standard values.
PPT is available to download at the following link.
https://drive.google.com/file/d/11PbDqSLjQlf-8o3XFXQi7_rLLk-2CDTD/view?usp=sharing
Видео Design of Tension Member as per IS800:2007 | Staggered Bolting & Lug Angle Design (Hinglish) канала All-Clear Coaching Classes
Design of steel structures Tension member Desgin of tension member Block shear strength Gross yielding bet section rupture tension member bolted tension member welded design of tension members Steel members in tension Connection design Welded tension members bolted tension members Design of lug angle lug angle staggered type bolting staggered design zigzag bolt design gross yielding net section rupture block shear failure connection design
Комментарии отсутствуют
Информация о видео
15 мая 2022 г. 9:23:08
00:56:22
Другие видео канала
Understanding Doubly Reinforced Beams | Necessity, Behaviour, and Formula Derivation | Hinglish
Lecture 5 : Service Unit Method Numerical, Factor Method & Approximate Quantity Method
Automatic Calculation Bar Bending Schedule Sheet for Beam in Excel.
Lecture 27 : Rate Analysis of Ceramic Tile Flooring & Brickwork in Superstructure
ADSS : Design of Gantry Girder, Load Calculation Numerical
Wait..! What Are They Doing ?
Dead Load and Live Load Calculation | Design of a Steel Structure for a Industrial Warehouse
Lecture 3 : Plinth Area Method Numerical & Cubical Content Method
Pile Cap Concreting
Roof Truss Configuration | Design of a Steel Structure for a Industrial Warehouse
Lecture 10 : Long Wall Short Wall Method : Concept
ADSS : Introduction to the Fatigue, Sourced of Fatigue, S/N curve, Endurance Limit
Design of RCC Structure Overview for Viva.
ADSS : Steel Stack/Chimney Theory Part 1
Analysis & Design of RCC Structures | Methods,Limit States & Partial Safety Factors Explained |Hindi
Design of Tension Member as per IS800:2007 | Bolted and Welded Angle Connection.(Hinglish)
Designing a Singly Reinforced Concrete Beam for Simply Supported Span | Example 4 | Hinglish
RCC Column Introduction & Design of Axially Loaded Short RCC Column Numerical (Hinglish)
Lecture 32 : Valuation Introduction : Types of Values
Lecture 15 : Long Wall Short Wall Multiple Rooms Numerical