FG EVO 2020 Diff build and driveline install!

For my first video in the build series of the FG EVO2020 I got over what it takes to assemble the self locking differential and the ball drive axles of the EVO. There were a few hiccups including some binding on the rear stub axle as well as my bulkhead caps being flipped during the factory assembly. All things said it went together smoothly. The machine work of all the alloy pieces are perfect and the finish is nice. There has been no hand fitting required.

You will want to make sure you have ample supply of blue thread lock! Every single screw of the car will need to be removed for thread lock to be installed.

Subscribe to follow along on this build!
Get your EVO2020 here: http://www.davesmotors.com/fg-evo-2020-kit-09503.html
The TORX wrenches I was using can be found here: http://www.davesmotors.com/DDM-Hardened-Steel-TORX-Star-Drivers-Set-of-6-T10-T15-T20-T25-T27-T30-4733-4734-4735.html
http://www.davesmotors.com/DDM-2-in-1-Magnetic-Hex-Driver-T-Handle-for-1-4-Drivers-280120.html

Видео FG EVO 2020 Diff build and driveline install! канала DDMSteveB