1990 Bronco / F150 Brake Disc & Hub removal, replacement (Full Length Video)

Lengthy breakdown of pulling tire, brake caliper, manual Warn locking hubs, wheel hub & disc break, separation, wheel bearing grease and install of aforementioned parts. Each side takes just over an hour to complete.

Jumped around a little bit, not the as linear as it could have been, so you'll probably have to skip around to find the info you're looking for.

Tools required:
7/64" Allen
Snap Ring Pliers
Ford Four Key Lock Nut Socket (Punch could do this job if you're okay marring locknut)
Tire Iron
Wheel Bearing Grease
Hammer
Punch
Adjustable Wrench (Remove brake line from caliper)
Small Flathead
Bearing / Race Driving Set (Rented from Oreilly's)
'C' Clamp
Brake Cleaner
Jacking Method and Stands
PPE
Torque Wrench (50-150 ft/lb value)

Parts replaced::
Brake Disc
Brake Pads
Brake Caliper
Wheel Bearings
Wheel Bearing Inner seal
Wheel Bearing Races

Thanks for watching, please let me know if you have any questions or share your thoughts on work arounds, etc.

Видео 1990 Bronco / F150 Brake Disc & Hub removal, replacement (Full Length Video) канала northlanderco