How to Install a Timbren Axle-Less Trailer Suspension | DIY Tutorial
We met up with Arcworks in Montana, USA to catch an inside look at how they installed their Axle-Less Trailer Suspension to their off-road trailer build. Check out this DIY Tutorial and learn how to install a trailer suspension on your own.
This is how to install your Axle-Less suspension, DIY style:
1. Bolt outboard arm onto control arm using fasteners supplied.
2. Make sure the frame is perfectly square. Measure the diagonal distance from one corner of the frame to the opposite corner i.e. left-hand front to right-hand rear / right-hand front to left-hand rear. Confirm measurements are equal, no less than 1/8” difference.
3. Install hangers to frame. Mark frame rails where the centreline of spindles should cross frame. Clamp hangers to frame making sure centre of spindles line up with marks on each frame rail. Confirm measurements are equal. Bolt hanger side plate to frame: Use holes in the hanger side plate as a template. Drill horizontal holes through the side of the frame. Use 5/8” UNC (grade 5 minimum) bolts, lock nuts, and washers to mount hangers to frame.
4. Two options for frame reinforcement. Bolt a reinforcing bracket to the inside of the frame. Weld a cross member to the hanger like Arcworks did.
Thank you for watching the DIY tutorial on how to install an Axle-Less Trailer Suspension.
For more information about this line of products visit us at https://timbren.com/c-1389196-products-axle-less-trailer-suspension.html.
Links to Our Other Product Lines:
Suspension Enhanced Systems 👉🏻 https://timbren.com/c-1389194-products-timbren-ses.html
Active Off-Road Bumpstops 👉🏻 https://timbren.com/c-1389193-products-active-off-road-bumpstops.html
💪🏻
Follow us on SOCIAL MEDIA & TAG us in your DIY builds!
Instagram - https://www.instagram.com/timbren_industries/
Facebook - https://www.facebook.com/Timbren.Industries/
Twitter - https://twitter.com/TimbrenInd
SUBSCRIBE to our YOUTUBE CHANNEL: https://www.youtube.com/TimbrenIndustries?sub_confirmation=1
Видео How to Install a Timbren Axle-Less Trailer Suspension | DIY Tutorial канала Timbren Industries
This is how to install your Axle-Less suspension, DIY style:
1. Bolt outboard arm onto control arm using fasteners supplied.
2. Make sure the frame is perfectly square. Measure the diagonal distance from one corner of the frame to the opposite corner i.e. left-hand front to right-hand rear / right-hand front to left-hand rear. Confirm measurements are equal, no less than 1/8” difference.
3. Install hangers to frame. Mark frame rails where the centreline of spindles should cross frame. Clamp hangers to frame making sure centre of spindles line up with marks on each frame rail. Confirm measurements are equal. Bolt hanger side plate to frame: Use holes in the hanger side plate as a template. Drill horizontal holes through the side of the frame. Use 5/8” UNC (grade 5 minimum) bolts, lock nuts, and washers to mount hangers to frame.
4. Two options for frame reinforcement. Bolt a reinforcing bracket to the inside of the frame. Weld a cross member to the hanger like Arcworks did.
Thank you for watching the DIY tutorial on how to install an Axle-Less Trailer Suspension.
For more information about this line of products visit us at https://timbren.com/c-1389196-products-axle-less-trailer-suspension.html.
Links to Our Other Product Lines:
Suspension Enhanced Systems 👉🏻 https://timbren.com/c-1389194-products-timbren-ses.html
Active Off-Road Bumpstops 👉🏻 https://timbren.com/c-1389193-products-active-off-road-bumpstops.html
💪🏻
Follow us on SOCIAL MEDIA & TAG us in your DIY builds!
Instagram - https://www.instagram.com/timbren_industries/
Facebook - https://www.facebook.com/Timbren.Industries/
Twitter - https://twitter.com/TimbrenInd
SUBSCRIBE to our YOUTUBE CHANNEL: https://www.youtube.com/TimbrenIndustries?sub_confirmation=1
Видео How to Install a Timbren Axle-Less Trailer Suspension | DIY Tutorial канала Timbren Industries
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The Bump Stop Upgrade Your 4Runner's CravingTundra TRD Pro Timbren SES Install VideoIt's the summer of adventure! #shortsTimbren SES is available for Trailers and RV’s! TRAAL is now available for overslung leaf springs!2024 Tacoma Towing! #timbrenTimbren SES Severe Service Kit. Designed for truck campers! Reduce sag and increase comfort!#timbrenSome kind words from RLT Suspension!Gravel Guy | Timbren StoriesNew Active Off-Road Bumpstops For 2nd & 3rd Gen Toyota 4Runner - ABSTOR4RTundra Active Off-road Bumpstop Install!4th Gen Toyota Tacoma Coil Spring ProblemsTimbren SES vs Active Off-road BumpstopsWho’s hitting the trails this weekend?! #timbrenThe Worlds Toughest Bumpstop💪8K Silent Ride Trailer Suspension Press ReleaseTimbren SES for Toyota Tacoma InstallJeep JKU rocking active off-road bumpstops! #TimbrenChevy & GMC 2500 Suspension Upgrade 🦾Close Call! Timbren Bumpstops in action!The Suspension Standard For The Snow Removal Industry | Timbren SESNo Tools Required? - Timbren SES Press Fit Kits