I can finally print flexible filament with the Kingroon KP3S 3D Printer | makermoekoe
Say hello to my tiny new printer: the Kingroon KP3S!
Kingroon was so kind and asked if I'm interested in the KP3S. It's a little budget friendly 3D-Printer with a build volume of 180x180x180mm. I said YES to the cooperation because of two facts: 1. It has a direct drive extruder which is perfectly for printing flexible filaments like TPU. I have a spool of TPU laying around for quite a while and I think there are several projects where I could use it. 2. It uses precision linear rails for both the x- and y-axis. Could get interesting for the smaller, more detailed prints.
You will find the Kingroon KP3S here:
https://www.aliexpress.com/item/4001279175159.html
https://www.amazon.com/dp/B08F51DPRX
As Kingroon has sent me this printer for free to try it and share my experiences I have to mark this as AD. I will share more content to this little device on my Instagram page!
I'm on Patreon! Your help is appreciated a lot! Check it out here: https://www.patreon.com/makermoekoe
Links:
Website: https://www.makermoekoe.com
Instagram: https://www.instagram.com/maker.moekoe/
Patreon: https://www.patreon.com/makermoekoe
GitHub: https://github.com/makermoekoe
Instructables: https://www.instructables.com/member/moekoe/
My commonly used tools: https://makermoekoe.com/tools-and-stuff-in-the-lab/
My camera equipment:
Camera: https://amzn.to/35sIGeg (*)
Microphone: https://amzn.to/3aZm2vq (*)
Camera clamps: https://amzn.to/2zUBYSF (*)
Mini tripods: https://amzn.to/35vCoe2 (*)
LED panel: https://amzn.to/35tbgfG (*)
*affiliate links.
Видео I can finally print flexible filament with the Kingroon KP3S 3D Printer | makermoekoe канала maker.moekoe
Kingroon was so kind and asked if I'm interested in the KP3S. It's a little budget friendly 3D-Printer with a build volume of 180x180x180mm. I said YES to the cooperation because of two facts: 1. It has a direct drive extruder which is perfectly for printing flexible filaments like TPU. I have a spool of TPU laying around for quite a while and I think there are several projects where I could use it. 2. It uses precision linear rails for both the x- and y-axis. Could get interesting for the smaller, more detailed prints.
You will find the Kingroon KP3S here:
https://www.aliexpress.com/item/4001279175159.html
https://www.amazon.com/dp/B08F51DPRX
As Kingroon has sent me this printer for free to try it and share my experiences I have to mark this as AD. I will share more content to this little device on my Instagram page!
I'm on Patreon! Your help is appreciated a lot! Check it out here: https://www.patreon.com/makermoekoe
Links:
Website: https://www.makermoekoe.com
Instagram: https://www.instagram.com/maker.moekoe/
Patreon: https://www.patreon.com/makermoekoe
GitHub: https://github.com/makermoekoe
Instructables: https://www.instructables.com/member/moekoe/
My commonly used tools: https://makermoekoe.com/tools-and-stuff-in-the-lab/
My camera equipment:
Camera: https://amzn.to/35sIGeg (*)
Microphone: https://amzn.to/3aZm2vq (*)
Camera clamps: https://amzn.to/2zUBYSF (*)
Mini tripods: https://amzn.to/35vCoe2 (*)
LED panel: https://amzn.to/35tbgfG (*)
*affiliate links.
Видео I can finally print flexible filament with the Kingroon KP3S 3D Printer | makermoekoe канала maker.moekoe
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
ESP32 based omnidirectional robots w/ camera | makermoekoeDIY motorized Camera Slider with oled controller | Full buildExtension boards for the ESP32 based Picoclick-C3 | makermoekoePicoclick-C3 is the most advanced ESP32 based IOT button | makermoekoeHow to design a simple dashbutton PCB with Autodesk Eagle | TimelapseI've built a Stencil Jig for fast and easy PCB assembly | makermoekoeQBot MINImill KIT assembling - 263 Parts done | makermoekoesminimill #2Paperclick - an ESP32-C3 based IOT device with an E-Paper display | makermoekoePicoclick C3T - the smallest ESP32-C3 based IOT button | assembly & tests | makermoekoeMy basement dream! What do you guys think of this lab? 😍 For the full video check out my Instagram!500 LED-Pixel RGB-BrickESP32-S2 based universal reflow oven controller | assembly & tests | makermoekoeHow to design a simple case for your EAGLE PCBs in FUSION360!XXL 7 segment display as a 100K FOLLOWERCOUNTER | makermoekoeMicroscopic Soldering with the Andonstar AD409 - Compilation #1 | makermoekoeMy new soldering microscope: The Andonstar AD249S-M | makermoekoeI built a LORA GPS-Tracker with ESP32 | makermoekoeSimple wooden DIY Lightbox for a little penny | makermoekoeI've built a GPS tracker with ESP32 | soldering, assembly & first test | makermoekoeYet another DIY 3D printed camera slider with linear bearings | Red EditionMY NEW TOOL IN THE LAB - Teaser | QBOT MINImill KIT - makermoekoesminimill #1