A70 Turbo to intercooler plumbing - A re-do plus, Arete Supercar Project
People were worrying about the turbo to intercooler plumbing passing through a firewall connection so I decided to move it to the engine compartment. (See, I do listen.) After careful analysis I deduced that by keeping the two turbo feeds separate until after they crossed the engine, and keeping them close to the firewall, I could clear the rear clamshell and still have access to the rear most spark plug. This is the video of that process.
Видео A70 Turbo to intercooler plumbing - A re-do plus, Arete Supercar Project канала BuilderCreator
Видео A70 Turbo to intercooler plumbing - A re-do plus, Arete Supercar Project канала BuilderCreator
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![A71 Okay, so one more foundation layer before the big superstructure layups. Arete Supercar project.](https://i.ytimg.com/vi/WxVg1u-oFao/default.jpg)
![](https://i.ytimg.com/vi/0btB2Jx5GmQ/default.jpg)
![A72 The trouble with building complex projects on YouTube and hinges. Arete Supercar project](https://i.ytimg.com/vi/gMfieYaDNwY/default.jpg)
![](https://i.ytimg.com/vi/gOePpTxzPAM/default.jpg)
![A74 Exhaust merge collector & radiator fan shroud. Arete Supercar project](https://i.ytimg.com/vi/r7duKvMURp0/default.jpg)
![Look who stopped by the studio! A shop/studio tour with Scott Jarvie.](https://i.ytimg.com/vi/8o-1Oi-OXN0/default.jpg)
![A77 Lamborghini parts off Ebay? Na! Build your own rear hub- part 2. Arete Supercar project](https://i.ytimg.com/vi/S4Tt0Re5CVk/default.jpg)
![We cut an engine in two and start the remaining half](https://i.ytimg.com/vi/u3Re3Bic4PY/default.jpg)
![A56 - Fuel cell liner](https://i.ytimg.com/vi/a6U80O7Gwso/default.jpg)
![This New Mod Will Add 400 Horsepower to Your Car](https://i.ytimg.com/vi/fzhmZaOK5PI/default.jpg)
![A66 Structural arterial spacers AKA- Coolant lines. Arete Supercar Project](https://i.ytimg.com/vi/TQfFVW2-nmo/default.jpg)
![A54 - This is what other drivers are going to see! Rear bumper fabrication - Arete Supercar project](https://i.ytimg.com/vi/fVx2hC9qOXk/default.jpg)
![A75 Rear hub (upright) part 1- Arete Supercar Project](https://i.ytimg.com/vi/W42oaD8X3bs/default.jpg)
![Is Your Car Safe to Turbo?](https://i.ytimg.com/vi/mhC1bh5GnYY/default.jpg)
![A55 Building the rear structure "thingy" that holds a supercar's bumper on! Arete Supercar project.](https://i.ytimg.com/vi/YGozNVR0pGk/default.jpg)
![Turbo Manifold 3D Printed from Inconel Powder](https://i.ytimg.com/vi/4jbn0ah3u9E/default.jpg)
![A78 Forged carbon intake runner. Number 1 of 10 items to get the Arete supercar running.](https://i.ytimg.com/vi/PiSqBeHV8_A/default.jpg)
![A42 - Mounting the Inter-cooler in my scratch built supercar- Arete Supercar project](https://i.ytimg.com/vi/zNVF03TGAX4/default.jpg)
![A44 - Carbon fiber reinforcement is what it took!- Arete Supercar project](https://i.ytimg.com/vi/N1CzZbWxTOI/default.jpg)
![A57 Under the nose! The front crash structure. Arete supercar project](https://i.ytimg.com/vi/NrJzcdMkC9k/default.jpg)