Free Machine Embroidery Design - In-the-Hoop Project Sunflower Coaster

Here at the Embroidery Legacy, we take pride in the quality of our machine embroidery designs. For that reason, we're giving away our free Embroidery Legacy Design Kit, featuring 4 longtime fan favorite machine embroidery designs including our in-the-hoop project sunflower coaster!

Experience the difference quality digitizing makes with these smooth, stunning designs created by award-winning digitizer and embroiderer John Deer. Click the link below to access your design kit now: https://www.digitizingmadeeasy.com/free-embroidery-legacy-design-kit/

If you’re new to embroidery and this project seems a bit complex, I really do encourage you to give it a try. Although there are several steps involved, it is quite easy once you get into the swing of it. Plus, I be-leaf in you! Ok, flower puns aside, let’s get started.

Here’s What You’ll Need:
-Tear-away stabilizer
-Wash-away or Dissolve away stabilizer
-200 x 300 hoop or larger
-Organza fabric
-Matching embroidery thread
-Painter’s tape

Step 1: Lay down a piece of Organza fabric. On top of this place a piece of water-soluble backing (dissolve-away/wash-away). On top of the wash-away, place another piece of Organza fabric (think of it like an oreo cookie; the white stuff goes in the middle). You can use the same color Organza for both pieces. Or, for a more creative effect, use two different shades of the same color Organza. Next, hoop all three pieces.

Step 2: Place the hoop on your machine and allow it to embroiderer the leaves. Remember to change the bobbin to match the bottom Organza color). Next, remove the hoop from the machine, and while the design is still in the hoop, use a stencil cutter to trace out the petals.

Step 3: Repeat the steps above two more times for the larger & smaller petals, remembering to change the bobbin color to match the bottom Organza color.

Step 4: We are now going to combine all three pieces using a piece of tear-away stabilizer. Begin by hooping the stabilizer by itself, then switch to a pre-wound bobbin and embroider the first placement guide stitches to create an X. Next, line up the hole on the leaves to the X on the placement guide stitches and tape it into place to ensure it does not move. Then proceed to embroider the second placement guide stitch.

Step 5: Line up the larger set of petals to the placement guide stitches and tape them into place. Then place your hoop back on your machine & stitch the next set of placement guide stitches.

Step 6: Line up the remaining set of small petals to the placement guide stitches and tape them into place. Please note that the smaller petals should be offset to the larger petals to give it a more realistic look. Then, place the hoop back on the machine & finish embroidering the center of the sunflower.

Step 7: Cover the exposed stitches on the backside of the sunflower with your piece of cork and tape it into place. Remember to change the bobbin to match the color of the cork and then run the finishing stitches. Next, remove all the tape and take the design out of the hoop.

From here, flip the design over and cut off the excess cork material around the stitches. You’ll then tear away the stabilizer.

Nicely done! Your in-the-hoop flower coaster is now in full bloom (I just had to add in one more flower pun).

If you enjoyed this tutorial and want to create more breathing taking projects that’ll stand out and demand attention, I invite you to check out our Embroidery Legacy Design Club.

https://www.digitizingmadeeasy.com/embroidery-legacy-design-club/

Echidna Hooping Station: https://www.digitizingmadeeasy.com/echidna-embroidery-hooping-station/

Intro & Free Designs: 0:00 - 0:35
Supplies Required: 0:35- 0:50
Step 1 : 0:50 - 1:18
Step 2: 1:18 - 2:11
Step 3: 2:11 - 3:32
Step 4: 3:32 - 4:11
Step 5: 4:11 - 4:37
Step 6: 4:37 - 5:14
Step 7: 5:15 - 6:32
Outro + Legacy Design Club: 6:32 - 7:04

Thanks for watching!

Free 30 Day Trial of Hatch Embroidery Software:
https://www.digitizingmadeeasy.com/hatch-embroidery-free-trial/

*Free Embroidery Embroidery 101 Cheat Sheet:
https://www.digitizingmadeeasy.com/embroidery-digitizing-beginner-cheat-sheet/

Free Embroidery Legacy Design Kit:
https://www.digitizingmadeeasy.com/free-embroidery-legacy-design-kit/

Interactive Digitizing Lessons here:
https://www.digitizingmadeeasy.com/e-classroom/digitizing/

Need fonts for Hatch, Wilcom, or Janome software?
https://www.digitizingmadeeasy.com/esa-fonts-for-hatch-and-wilcom/

Facebook:
https://www.facebook.com/JohnDeerEmbroidery/

Instagram:
https://www.instagram.com/embroiderylegacy/

Facebook Group:
https://www.facebook.com/groups/embroiderylegacy

Hatch Facebook Group:
https://www.facebook.com/groups/HatchFacts/

Our Recommended Amazon Embroidery Products:
https://www.digitizingmadeeasy.com/our-recommended-embroidery-products/

Subscribe to our newsletter: https://www.digitizingmadeeasy.com/newsletter-subscribe/

Видео Free Machine Embroidery Design - In-the-Hoop Project Sunflower Coaster канала John Deer's Embroidery Legacy