Intro to Racecar Engineering: 11 King Pin Inclination
Smitty describes king pin inclination. This is the eleventh in the video series developed for UCI's racecar engineering program. (Smitty and the Professor series)
http://mechanicaldesign101.com/smitty-and-the-professor/
Видео Intro to Racecar Engineering: 11 King Pin Inclination канала mechanicaldesign101
http://mechanicaldesign101.com/smitty-and-the-professor/
Видео Intro to Racecar Engineering: 11 King Pin Inclination канала mechanicaldesign101
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Intro to Racecar Engineering: 10 Caster
LPEpower episode 03 - Kingpin inclination
Understanding Wheel Alignment !
Basic Chassis Set Up 1 - Camber, Castor, Toe, and Ackerman
Intro to Racecar Engineering: 16 Performance Ideals
Suspension: Camber, Caster, KPI, Scrub radius, Arckerman, Cantilever, Pitch & Roll center
Steering Axis Inclination - Explained
Intro to Racecar Engineering: 04 Chassis Design
How to Make a Drift Trike with Fat Tires
Intro to Racecar Engineering: 12 Toe and Camber
What did we build?| This will help everyone understand front suspension geometry
Tyre Camber explained
Intro to Racecar Engineering: 08 Springs
Intro to Racecar Engineering: 05 Suspension Design
Intro to Racecar Engineering: 01 Getting Started
Steering Geometry - Camber | Caster | King pin inclination | Toe in & Toe out | Scrub radius
Caster Angle In Car Suspension
How King Pin Inclination Angle (KPI/KPA) Works
Suspension Geometry - Part 1 (Camber, Toe, Caster, KPI, Scrub Radius)