cx20 factory apm power module step by step

I show how to install a power module on a
cheerson cx20 apm 252_V5.0
You can also use the 5 volt bec to power your apm
or use for other 5 volt devices.
APM2.6 2.8 Pixhawk Power Module V1.0 Output BEC 5V 3A
APM Power Module with 5.3V DC BEC

banggood link
https://goo.gl/tDYR38 //apm power module xt60
https://goo.gl/RfmNL0 // 3 pin molex wires

with the 3 pin molex .. if your creative ..you should be able
to remove all the wires out of one side of the molex wire
and plug all 5 wires into the power module cable ..this way you will
have 3 wires for apm2.6 and Red and black for 5 volts.

the 6wire would be your extra 5 volts.
also if you are finding your "battery capacity" 3300 mAh
is not changing,
fallow this pic
https://drive.google.com/open?id=0B2w6_OKE_2kxS2xUejJyZkMta1E
....
...
..
.Support
https://www.paypal.me/bangs6996

If I help you in the comments don't ever feel obligated to donate.
all money will go towards future video's
-
-
-

Видео cx20 factory apm power module step by step канала ModItBetter