24 MONTHS of FPV | Flying progress 🤯

Each clip is a different month beginning with my first HD flight in my first month of flying to present day. This video is a slow burn since the first quarter is meh flying from a newbie, but I think its worth a watch the whole way through. :)

I've kept video of just about every flight I've done since I started flying back in March 2018. I'm glad I had the foresight to archive it all by day, month and year so that it enables me to make an edit like this one. Here are some fun stats:
-1000+ videos in storage.
-At 3 minutes each at least, that's over 2 days of raw footage.
-About 3.5TB of storage used in total (raw recordings and masters of the videos I've posted.)
-There's literally enough footage to do this same edit differently 100x over. lol
-I may or may not have eyeballed the stats above :p
Team Pilot for:
Armattan Quads
HQProp
Newbeedrone
MyFPVStore
Goonskwad
-------------------------------------------------------
All links are up to date (Most are affiliate). Gear listed here can be found in my quads and is the gear I use to have a fun, quality experience.

--5inch Kwad Setup- -
Frame:
-Armattan Badger https://bit.ly/2Ur6fNH
Flight Controller:
-FETtec FC https://bit.ly/2s32upo
ESC:
-FETtec 4in1 ESC https://bit.ly/2FuAOwY
Power Board:
ImpulseRC WOLF PDB https://bit.ly/2GILEBX
Motors:
-Mr. Steele Stout v3 2306 1750kv https://bit.ly/30Mzopw
-Armattan TOA 23061750kv https://bit.ly/34VX3Xf
Props:
-HQProp Ethix S4 5x3.7x3 https://bit.ly/2Lkwmpq
Camera:
-Runcam Swift Mini 2 with 2.5MM lens
Receiver:
-Crossfire Nano https://bit.ly/2Db08Gn
Receiver Antennas:
-Standard https://bit.ly/2t4T3Td
-Immortal T https://bit.ly/2DRakpl
VTX:
-TBS Unify Pro HV https://bit.ly/2DbjZWi
-TBS Unify Evo https://bit.ly/32G0rDY
VTX Antenna:
-TBS Triumph https://bit.ly/2Ttefhp
Battery:
-Thunder Power 6S 1100mah
Battery Straps:
-ETHIX GoPro Strap https://bit.ly/2WzaWHv
--10inch Kwad Setup--
Frame:
-Nasty405 10inch sculptcopter.com
Flight Controller:
-BrainFPV Radix https://bit.ly/2p2wiOf
-Radix PB https://bit.ly/2DftykV
ESC:
-Airbot Wraith Metal V2 66A ESCs w/ 50v 1000uf low ESR caps. https://bit.ly/2HORBi7
Battery:
Pyrodrone Graphene 2200 5S https://bit.ly/2t6lXm5
Motors:
-BrotherHobby Tornado T5 3115 1050kv motors w/ HQ 10x5x3 Props
https://bit.ly/2yaAb7Y
https://bit.ly/310zDy1

VTX:
TBS Unify Pro V3 https://bit.ly/2RzQaUs
Antenna:
-TBS Triumph https://bit.ly/2Ttefhp

RX:
-Crossfire Nano https://bit.ly/2Db08Gn
-w/ SMA pigtail running to a Crossfire tuned TX antenna.

Camera:
-Runcam Eagle Micro https://bit.ly/2S6WTu4
-M8N UBLOX GPS
-3D printed rear dual SMA mount and GPS mount by @danimal_fpv.

--Gear--
Radio:
-Jumper T16 https://bit.ly/2P6FaP9
Long Range:
-TBS Crossfire Micro Module https://bit.ly/2MNDGYl
Goggles:
-FatShark HDO
Goggle Receiver:
-TBS Fusion https://bit.ly/2kAt8Ca
Antennas:
-VAS Ion v2 https://bit.ly/31nuhgc
-VAS Crosshair XTREME (Better than what I use) https://bit.ly/2RDy1oy

Other Gear:
-Gopro Session 5
-GoPro Hero 7 Black
-Ethix Neck Strap:https://bit.ly/2RgmgIp
-Ethix goggle strap: https://bit.ly/2qUrKhf
-Soldering Iron https://bit.ly/2HMuxjR
-Soldering Iron Carry Case: https://bit.ly/2HMBMsh
-BetaFlight Hive Backpack

Видео 24 MONTHS of FPV | Flying progress 🤯 канала Red5 FPV