Racing Drohne für unter 350 EUR bauen - ALLE Teile aus Deutschland von VIPA FPV
Racing Copter sind eine Wissenschaft für sich. Noch kleiner, leichter und wendiger müssen sie sein. In diesem Video erfahrt ihr von VIPA FPV wie ihr euren eigenen Copter aufbauen müsst - und die Teile sind auch alle unten verlinkt. Copterfarm hat eventuell noch einige Teile im Zulauf. Achtet da bitte drauf.
#racingcopter #fpvracing #spinfast
3:59 Rahmen Aufbau
8:51 Motoren
10:45 ESC
13:51 Motorkabel anlöten
21:53 Flight Controller verkabeln
26:00 TBS Crossfire Empfänger
36:46 Foxeer FPV-Cam
41:18 Crossfire System einrichten /Empfänger binden
44:52 Endmontage
Vielen Dank an VIPA FPV für die tolle Arbeit an dieser Stelle nochmal.
Seine Socials findet ihr hier:
https://www.youtube.com/channel/UCiatXi54q9v7M40bptuYa5g
https://www.instagram.com/vipa_fpv/
Teile-Liste für den Copter
Frame: CrissCrossFPV Cross 5”
https://crisscrossfpv.com/frames/cross5-fpv-drone-racing-frame
ab 49,00 €
Motoren: 4x LDPower.de 2306 1650kV
https://www.ldpower.de
https://ldpower.de/produkt-kategorie/motoren/fpv-racefreestyle/
24,90 € pro Motor = 99,60 €
Racewire: Menace Skids Race Wire
https://www.copterfarm.de/menace-prop-skids-race-wire-4-stueck-1001.html
4,83 €
ESC: Aikon AK32PIN 4-in-1 35A 20x20
https://www.copterfarm.de/aikon-ak32pin-4-in-1-35a-6s-20x20-712.html
58,39 €
FC: Aikon F42020 (Lieferbar in 14 Tagen)
https://www.copterfarm.de/aikon-f42020-flight-controller-714.html
29,15 €
Alternativ den F7 bestellen aber dann auch den ESC dazu bestellen!!!
https://www.copterfarm.de/aikon-f7-mini-v2-flight-controller-20x20-917.html
Nylon-Standoffs M3:
https://www.copterfarm.de/upsido-nylon-standoff-m3-schwarz-10-stueck-499.html
1,55 €
Nylon Muttern M3:
https://www.copterfarm.de/upsido-nylon-mutter-m3-schwarz-10-stueck-500.html
1,17 €
VTX: TBS Unify Nano Pro
https://www.copterfarm.de/team-blacksheep-tbs-vtx-unify-pro-nano-5-8ghz-383.html
21,35 €
RX: TBS Crossfire Nano RX (SE)
https://www.copterfarm.de/team-blacksheep-tbs-crossfire-nano-rx-se-fernsteuerung-empfaenger-382.html
33,05 €
Mounting Board: Whitenoise FPV Unify / Crossfire Nano 20x20
https://www.copterfarm.de/whitenoise-fpv-unify/crossfire-nano-20x20-board-568.html
6,34 €
Cam: Foxeer Predator Micro V4
https://amzn.to/2HrwXVx
30,06 €
Akku: Bonka 1300mAh 6S 95C
https://ldpower.de/produkt/bonka-lipo-6s-95c/
36,90 €
Smokestopper XT60:
https://www.copterfarm.de/smoke-stopper-xt60-by-rdq-572.html
Alternativen falls obiges nicht verfügbar ist:
FlyWoo Vampire Frame https://bit.ly/3i4CCh3
Motoren T-Motor Velox https://bit.ly/32Xc7FC
Mamba F722 Mini Stack https://bit.ly/2EqiyYs
Foxeer Micro Predator https://bit.ly/2FUyYsL
Rush TinyTank VTX https://bit.ly/362A8NE
FrSky XM+ RX https://bit.ly/32TAbcw
#fpvracing
Видео Racing Drohne für unter 350 EUR bauen - ALLE Teile aus Deutschland von VIPA FPV канала Spinfast
#racingcopter #fpvracing #spinfast
3:59 Rahmen Aufbau
8:51 Motoren
10:45 ESC
13:51 Motorkabel anlöten
21:53 Flight Controller verkabeln
26:00 TBS Crossfire Empfänger
36:46 Foxeer FPV-Cam
41:18 Crossfire System einrichten /Empfänger binden
44:52 Endmontage
Vielen Dank an VIPA FPV für die tolle Arbeit an dieser Stelle nochmal.
Seine Socials findet ihr hier:
https://www.youtube.com/channel/UCiatXi54q9v7M40bptuYa5g
https://www.instagram.com/vipa_fpv/
Teile-Liste für den Copter
Frame: CrissCrossFPV Cross 5”
https://crisscrossfpv.com/frames/cross5-fpv-drone-racing-frame
ab 49,00 €
Motoren: 4x LDPower.de 2306 1650kV
https://www.ldpower.de
https://ldpower.de/produkt-kategorie/motoren/fpv-racefreestyle/
24,90 € pro Motor = 99,60 €
Racewire: Menace Skids Race Wire
https://www.copterfarm.de/menace-prop-skids-race-wire-4-stueck-1001.html
4,83 €
ESC: Aikon AK32PIN 4-in-1 35A 20x20
https://www.copterfarm.de/aikon-ak32pin-4-in-1-35a-6s-20x20-712.html
58,39 €
FC: Aikon F42020 (Lieferbar in 14 Tagen)
https://www.copterfarm.de/aikon-f42020-flight-controller-714.html
29,15 €
Alternativ den F7 bestellen aber dann auch den ESC dazu bestellen!!!
https://www.copterfarm.de/aikon-f7-mini-v2-flight-controller-20x20-917.html
Nylon-Standoffs M3:
https://www.copterfarm.de/upsido-nylon-standoff-m3-schwarz-10-stueck-499.html
1,55 €
Nylon Muttern M3:
https://www.copterfarm.de/upsido-nylon-mutter-m3-schwarz-10-stueck-500.html
1,17 €
VTX: TBS Unify Nano Pro
https://www.copterfarm.de/team-blacksheep-tbs-vtx-unify-pro-nano-5-8ghz-383.html
21,35 €
RX: TBS Crossfire Nano RX (SE)
https://www.copterfarm.de/team-blacksheep-tbs-crossfire-nano-rx-se-fernsteuerung-empfaenger-382.html
33,05 €
Mounting Board: Whitenoise FPV Unify / Crossfire Nano 20x20
https://www.copterfarm.de/whitenoise-fpv-unify/crossfire-nano-20x20-board-568.html
6,34 €
Cam: Foxeer Predator Micro V4
https://amzn.to/2HrwXVx
30,06 €
Akku: Bonka 1300mAh 6S 95C
https://ldpower.de/produkt/bonka-lipo-6s-95c/
36,90 €
Smokestopper XT60:
https://www.copterfarm.de/smoke-stopper-xt60-by-rdq-572.html
Alternativen falls obiges nicht verfügbar ist:
FlyWoo Vampire Frame https://bit.ly/3i4CCh3
Motoren T-Motor Velox https://bit.ly/32Xc7FC
Mamba F722 Mini Stack https://bit.ly/2EqiyYs
Foxeer Micro Predator https://bit.ly/2FUyYsL
Rush TinyTank VTX https://bit.ly/362A8NE
FrSky XM+ RX https://bit.ly/32TAbcw
#fpvracing
Видео Racing Drohne für unter 350 EUR bauen - ALLE Teile aus Deutschland von VIPA FPV канала Spinfast
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Free Drone Follower - Giveaway & Short Flight/Sports](https://i.ytimg.com/vi/z3lzWI2i3Gs/default.jpg)
![High Speed Car Chasing und FPV Racing ist dein DING? HAKRC 4in1 ESC für FPV Drohnen](https://i.ytimg.com/vi/-6oDyoQACfY/default.jpg)
![MR STEELE THREW A BOTTLE AT OUR QUAD! (CEBIT Day 1 Impressions)](https://i.ytimg.com/vi/oYXY8fwyImY/default.jpg)
![Willst du Spinfast Merch? Dann baue mit am neuen T-Shirt Design!](https://i.ytimg.com/vi/KEyhpPc_RBU/default.jpg)
![Welche FPV Klamotten gibt es und was tragt ihr so? + VERLOSUNG DCL Merch](https://i.ytimg.com/vi/obRJuEZBPf4/default.jpg)
![Wer ist schneller? FPV Drohne vs Parkour Läufer im TV](https://i.ytimg.com/vi/lkH2D1x7OM8/default.jpg)
![SPINFAST - look out 2018 - interviews, DRL, freak, vlog](https://i.ytimg.com/vi/F3UNlITjprg/default.jpg)
![Hol dir die PREISE ab! 20k Follower Special-Stream mit großer Schnitzeljagd](https://i.ytimg.com/vi/bVZePacY48Q/default.jpg)
![WOK WM 22 mit Spinfast](https://i.ytimg.com/vi/ijE2bZQGkxI/default.jpg)
![Orqa Update! Was kann die 759 EUR FPV Brille? Orqa FPV.One Eindruck nach 2 Wochen Nutzung](https://i.ytimg.com/vi/XRiYWh-CGcI/default.jpg)
![CEBIT Countdown: Next Winner Freestyle Night Contest](https://i.ytimg.com/vi/rPyBHGr6SyM/default.jpg)
![Heute Abend Drone Champions League einschalten!](https://i.ytimg.com/vi/O55l9T6ZAmc/default.jpg)
![CINEWHOOP FPV Drohne - Beste Filmplattform für Cinematic Shots mit Action Cams](https://i.ytimg.com/vi/sVnrjvNtgP0/default.jpg)
![Walksnail Avatar - neue Hardware und lohnt es sich nach 1 Jahr?](https://i.ytimg.com/vi/oX_p4x0yZ-8/default.jpg)
![PID Basics für Anfänger- Die Grundlagen des FPV-Drohnen Tunings](https://i.ytimg.com/vi/25TWmtt33wY/default.jpg)
![Mehr FPV für deinen Einsatz - Hollyland Mars 4k Transmission Combo](https://i.ytimg.com/vi/VD-QTXI3UQc/default.jpg)
![Mini-Racer Drohne unter 100€ und 100 Gramm: Test & Technik Eachine Twig](https://i.ytimg.com/vi/REtksJ0rGG8/default.jpg)
![BETAFPV LiteRadio 2 *Gamechanger* Beginner-Funke / Bester FrSky Transmitter für Anfänger](https://i.ytimg.com/vi/MsyJitY29_g/default.jpg)
![DAS könnte dein neuer Antrieb sein #ONBO Lipos - Kleiner! Leichter! Besser?](https://i.ytimg.com/vi/0REdLfbkYoA/default.jpg)
![iFlight Commando 8 Review](https://i.ytimg.com/vi/OaM6r7AYQ4Q/default.jpg)
![Der ERSTE mit DJI O3 AIR UNIT - iFlight Nazgul Evoque F5D im Test.](https://i.ytimg.com/vi/oN-M_HIiO08/default.jpg)