Farmall Cub Tune-Up How-To: Points, Rotor, Condenser, Coil, Plugs and Wires for Distributor
Dan and Rachel show how to install new points, plugs, condenser, rotor, distributor and coil on a Farmall Cub tractor.
Please note: the coil explanation is specific to the Cub tractor.
Parts are available at this link: https://farmtractorrepair.com/collections/international-distributor-and-tune-up-parts/Farmall-Distributor
Follow Rachel on Facebook: www.Facebook.com/tractorrachel
Follow J&D Productions on Instagram: www.Instagram.com/janddproductionsinc
The producers of this free tutorial do not assume any responsibility for accidental injury, death or dismemberment resulting from the performance of any orations detailed in this tutorial. Please be aware of common safety steps--expressed, implied or not expressed.
Видео Farmall Cub Tune-Up How-To: Points, Rotor, Condenser, Coil, Plugs and Wires for Distributor канала Dan Gingell and Rachel Gingell
Please note: the coil explanation is specific to the Cub tractor.
Parts are available at this link: https://farmtractorrepair.com/collections/international-distributor-and-tune-up-parts/Farmall-Distributor
Follow Rachel on Facebook: www.Facebook.com/tractorrachel
Follow J&D Productions on Instagram: www.Instagram.com/janddproductionsinc
The producers of this free tutorial do not assume any responsibility for accidental injury, death or dismemberment resulting from the performance of any orations detailed in this tutorial. Please be aware of common safety steps--expressed, implied or not expressed.
Видео Farmall Cub Tune-Up How-To: Points, Rotor, Condenser, Coil, Plugs and Wires for Distributor канала Dan Gingell and Rachel Gingell
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Rebuild a Farmall Engine: Step-By-Step Instructions for an H, M, 300, 350, 400, 450 and MoreFord Tractor Engine Refresh: Valves, Head Gasket and Rings for Jubilee, 600, 800, 900, 2000, 4000Spreading Manure With An IH Farmall Cub And A McCormick-Deering 100 Manure SpreaderFord Distributor Rebuild & Troubleshoot: Points, Coil, Cond.: Ford 9N, 2N and 8N Front Mount TractorInfo about and driving an antique tractor Farmall CubWill This Tractor Start After Sitting For 20 Years?How to Take First Place at a Tractor Pull: Wheels and Tire Pressure74 year old vintage tractor left in a barn for 20 years... Will it start??Dad cultivating grandpa's garden with a 1949 Farmall CubBreaking Virgin Ground with Farmall CubMassey Ferguson Hydraulic Repair, Easy Step-by-Step TutorialFord Engine Rebuild: 8N, 9N, 2N, Assembly of Short Block: Bearings, Pistons, Oil Pump. Part 2 of 4Changing points in a distributorFord 2000, 3000, 4000 Hydraulic Repair, Top Lid: Hydraulics that Shake, are Intermittent or StuckHow to Rebuild an Allis Chalmers Fairbanks Morse Magneto: Easy Step-By-Step InstructionsFarmall Cub Oil Change: Easy Step-by-Step Tutorial for DIYersHow to Buy a Used Tractor: Visual and Mechanical Inspection StepsFord Hydraulic Pump Installation, High-Compression Fitting, How to Install without LeaksHow Much Does It Cost To Restore An Old Tractor? Farmall Super M Restoration Ep.60: Adding It All Up